John Deere 410 Specs: The John Deere 410 is a 2WD or 4WD backhoe loader tractor that John Deere produced in Dubuque, Iowa, in the United States, between 1971 and 1983.
The John Deere 410 has a power shuttle with wet disc clutch transmission and a 3.6 L (219.0 cu in) four-cylinder diesel engine. There are 8 forward and 8 backward gears on the power shuttle.
John Deere supplied the engine for the JD 410 backhoe loader tractor. It is a four-cylinder, natural-aspirated diesel engine with a displacement of 3.6 L, 3,589 cm2, (219.0 cu in), with cylinder bore and stroke measurements of 102.0 mm (4.02 in) and 110.0 mm (4.33 in), respectively.
This engine delivered 217.0 Nm (22.1 Kgm, 159.9 ft-lb) of torque at 1,300 rpm and 66.9 PS (49.2 kW; 66 HP) of output power at 2,500 rpm.
The John Deere 410 comes with a 73.8 liter (19.5 US gal; 16.2 Imp. gal) fuel tank, power steering, hydraulic wet disc brakes, four-post ROPS, and a cab with an optional heater.
John Deere 410 Backhoe Loader Key Facts
- 1 John Deere 410 Backhoe Specifications
- 2 John Deere 410 Backhoe Loader Review
- 3 FAQs
- 66 horsepower in gross
- 62 horsepower, net.
- MEASURED POWER AT: 2500 RPM
- 4 CYLINDERS, TOTAL
- MAXIMUM NET TORQUE: 216.9 Nm
- 13 L Fuel Capacity
- The maximum forward speed is 26.4 km/h.
- Maximum reverse speed: 30.1 km/h
John Deere 410 Backhoe Loader Price
Price: US $17,900 (Used Model Price)
John Deere 410 Backhoe Specifications
|Model||John Deere 410|
|Length||7,250 mm (285.4 in)|
|Width||2,130 mm (83.9 in)|
|Height||2,590 mm (102 in)|
|Wheelbase||2,080 mm (81.9 in)|
|Weight||6,445 kg (14,209 lbs)|
|Fuel tank capacity||73.8 liters (19.5 US gal.; 16.2 Imp. gal)|
|Battery||Two 6V, 340Ah|
|Cabin type||Four-post ROPS or Cab with available heater|
|Engine model||John Deere|
|Engine type||Four-stroke, liquid-cooled, inline|
|Displacement||3.6 L, 3,589 cm2, (219.0 cu·in)|
|Bore and stroke||102.0 mm X 110.0 mm (4.02 in X 4.33 in)|
|Horsepower||66.9 PS (49.2 kW; 66 HP) at 2,500 Rpm|
|Torque||217.0 N·m (22.1 kg·m, 159.9 ft·lb) at 1,300 Rpm|
|Oil capacity:||8.5 L (9 US. qt, 7.5 Imp. qt.)|
|Coolant capacity:||12.3 L (13 US. qt, 10.8 Imp. qt.)|
Transmission and chassis
|Chassis||4×2 2WD or 4×4 MFWD 4WD|
|Brakes||Hydraulic wet disc|
|Final drive||Inboard planetary|
|Transmission type||Power shuttle with wet disc clutch|
|Gears||8 forward and 8 reverse|
|Speed||Forward: 26.4 Kmh (16.4 mph) Reverse: 30.1 (18.7 mph)|
|Transmission oil capacity||37.9 L (10 US. gal, 8.3 Imp. gal.)|
|Front tires||Industrial: 11L-16, 7.50-16, 8.00-16|
|Rear tires||Industrial: 16.9-24, 18.4-24, 19.5L-24, 21L-24|
|Hydraulic type||Closed center|
|Hydraulic capacity||77.6 L (82 US. qt, 68.28 Imp. qt.)|
|Pressure||2350 psi (162 bar)|
|Pump flow||38.0 GPM (143.8 Lpm)|
The following attachments are available for the JD 410 backhoe loader tractor
- Deere loader
- Backhoe by John Deere
John Deere 410 Backhoe Loader Review
The John Deere 410 Backhoe Loader Specifications and other important features are included on this page. I hope you’ve found all you were looking for online. I also wish you had a good time reading this content.
What does a John Deere 410 weight?
Maximum Digging Depth with a Standard Dipperstick: 4.85 m (15 ft. 11 in.) 8,068 kg operating weight (17,786 lb.)
How much can a John Deere 410 lift?
5000 pound. Height to bucket hinge pin: 10 feet (2268 kg).
How much can a John Deere 410 loader lift?
(102mm) Full height lifting capabilities. . . . . . . . . . . . . . . . . . . . 5000 pound. Height to bucket hinge pin: 10 feet (2268 kg). 9in.