Mahindra 3016 Specs,Weight, Price & Review ❤️

Mahindra 3016 Specs,Weight, Price & Review

Check here. In this post, I have gathered all the information on the Mahindra 3016 Specs from the (official site), includingMahindra 3016 features, weight, price, and dimensions.

Mahindra 3016 Overeviw

The Mitsubishi engine was utilised in the tiny utility tractor Mahindra 3016. It has a 1.3 L, 1,317 cm2, (80.4 cu in), three-cylinder natural aspirated diesel engine with cylinder bore and stroke measurements of 78.0 mm (3.07 in) and 92.0 mm (3.62 in) respectively.

The rating for compression ratio is 22.0:1. The maximum output power of this engine was 28.4 PS (20.9 kW; 28.0 HP) at 2,600 rpm.

The Mahindra 3016 has wet disc brakes, hydrostatic power steering, an open operator station with two-post ROPS, and a fuel tank capacity of 27.0 litres (7.1 US gal; 5.9 Imp. gal).

Mahindra 3016 Price

Price:  $13,325

Mahindra 3016 Weight

Weight: 4389 to 4950 pounds

Mahindra 3016 Horsepower

Horsepower: 41 horsepower

Mahindra 3016 Specifications

Mahindra 3016 General Specifications
Model	Mahindra 3016
Length	3,080 mm (121.3 in)
Width	1,510 mm (59.4 in)
Height	–
Wheel base	–
Weight	Shuttle: 1,105 kg (2,436 lbs) Hydro: 1,115 kg (2,459 lbs)
Fuel tank capacity	27.0 liters (7.1 US gal.; 5.9 Imp. gal)
Battery	12V, 46Ah
Cabin type	Open operator station with two-post ROPS
Mahindra 3016 Engine
Engine model	Mitsubishi
Engine type	Four-stroke, liquid-cooled, inline
Cylinders	3
Fuel type	Diesel
Displacement	1.3 L, 1,317 cm2, (80.4 cu·in)
Bore and stroke	78.0 mm X 92.0 mm (3.07 in X 3.62 in)
Compression ratio	22.0:1
Horsepower	28.4 PS (20.9 kW; 28.0 HP) at 2,600 rpm
Starter	Electric
Transmission and chassis
Chassis	4×4 MFWD 4WD
Steering type	Hydrostatic power
Brakes	Wet disc
Transmission model	–
Transmission type	Synchronized shuttle with dry disc clutch
Gears	8 forward and 8 reverse
Transmission model	–
Transmission type	Hydrostatic
Gears	Infinite (3-range) forward and reverse
Mahindra 3016 Tires
Front tires	Ag: 7×16
Rear tires	Ag: 11.2×24
Mahindra 3016 Three-Point Hitch
Caterogy	I
Control type	Position control
Lift capacity (at ends)	1,200 kg (2,646 lbs)
Mahindra 3016 PTO (Power take-off shaft)
Middle PTO type	Optional
Middle PTO spped	2,000 rpm
Rear PTO type	Independent (shuttle) or live (hydrostatic)
Rear PTO spped	540 rpm
Mahindra 3016 Hydraulic system
Hydraulic type	Open center
Valves	1
Pump flow	7.8 gpm (29.5 lpm)
Steering flow	3.4 gpm (12.9 lpm)
Total flow	11.2 gpm (42.4 lpm)

Mahindra 4025 Review Video

Mahindra 4025 FAQs

For the maximum satisfaction of your needs, the 6075 open station has 4WD. With 61 PTO horsepower, an electronic power shuttle transmission, mCRDTM engine technology, the largest tyres, the heaviest built-in weight, and the longest wheelbase in its class, this tractor has the strength and durability to assist you in finishing your work.

Is Mahindra as good as Kubota?

In comparison, Kubota and Mahindra’s quality is incredibly close. Particularly with their earlier models, Mahindra is renowned for being tough and durable. Their most recent models will probably maintain the same reputation as time goes on. Kubota is renowned for operating with finesse.

Which engine is best in Mahindra?

The most recent tune for the XUV500 produces 155 horsepower, has excellent torque distribution, is extremely durable and reliable, quick, and tolerably efficient. The Sumo Grande, Scorpio, Hexa, and XUV500 are just a few of the UVs that have been powered by these 2.2s. It’s impressive how versatile the engine is.

Mahindra 4025 Final Words

The article concludes with what you will likely find of Massey Ferguson 2607H specs, price review, and attachments. I hope you will enjoy this piece.

If you have any concerns about it, post your comment in the comments section, and I’ll address your problem as fast as possible.

If you’re happy with this article, Please spread the word to your acquaintances and on social media. Thank you for visiting our website. Make sure to return frequently for more updates.