Kubota bh77 Overview
Kubota bh77 : The BH77 backhoe is designed with the Kubota tractors L2501, B2650, B3350, L2501, L3200, L3301, L3560, L3901 to offer more power and greater capacity. That is equipped with a quick attach/detach mounting system.
This makes attaching or detaching the backhoe a snap. So you can quickly move on to your next job.
Kubota bh77 Price New
price – $8,400.00 USD
Kubota bh77 Weight
operating Weight – 1085 lbs (490 kg)
Kubota bh77 Feature
Curved Boom:
The new curved boom can dig deeper, is easier to use, and gives you better visibility.
Protected Hoses:
All of the hoses are tucked away in the backhoe arm, which makes them safer and gives the machine a cleaner look.
Quick Attaching/Detaching:
The BH77’s quick attach/detach mounting system makes it easy to attach and remove the backhoe, so you can move on to your next job quickly.
Mechanical Thumb (Optional):
The Kubota BH77 can also come with a 6-position mechanical thumb, which gives it more uses and makes it easier to move materials.
Kubota bh77 Specifications.
BH77 Model | |
Transport height | 80.7in. (2051mm) |
Stabilizer spread – transport | 51.8in. (1315mm) |
Ground clearance | 12.6in. (319mm) |
Digging depth 2ft flat bottom | 91.8in. (2331mm) |
Operating height fully raised | 119.2in. (3029mm) |
Loading height (length of dipper cyl.=680mm) | 66.7in. (1693mm) |
Loading reach (length of dipper cyl.=680mm) | 50.8in (1290mm) |
Reach from the swing pivot | 124.6in (3165mm) |
Swing pivot to rear axle center line | 38.4in (976mm) |
The angle of departure per SAE J1234 | 17.3deg. |
Swing arc | 180deg. |
Digging force | |
With bucket cylinder | 3421 lbs (15220 N) |
With a dipper stick cylinder | 2190 lbs (9738 N) |
Cycle Time (seconds) | |
Boom cylinder, extend | 3.5 sec. |
Boom cylinder, retract | 3.1 sec. |
Swing cylinder, from 90 deg | 2.1 sec. |
Dipperstick cylinder, extend | 4.9 sec. |
Dipperstick cylinder, retract | 3.4 sec. |
Bucket cylinder, extend | 3.2 sec. |
Bucket cylinder, retract | 2.5 sec. |
Stabilizer cylinder, lower | 2.4 sec. |
Stabilizer cylinder, raise | 2 sec. |
Kubota bh77 Review
The Kubota BH77 is a tough and changeable digging tool that lots of regular people and small businesses like. It can dig really deep, up to 93.6 inches, and can reach pretty far about 190.9 inches. You control it using a stick thing inside the tractor’s room.
All in all, the Kubota BH77 is a good pick if you need a strong and adjustable digging tool. But it might cost a lot and could be too big for some small tractors. For More Details Check Out The YouTube Video.
Kubota BH77 Weight
The Kubota BH77 backhoe attachment has an operating weight of 1,085 pounds.
Kubota BH77 Review
The Kubota BH77 backhoe attachment is a reliable and powerful option for compact tractor owners. Its digging performance is impressive, with a digging force of 3,421 pounds and a bucket breakout force of 3,421 pounds. The backhoe attachment is also easy to attach and detach, thanks to its quick-detach mounting system.
One potential drawback of the Kubota BH77 backhoe attachment is its price. With a starting price of around $6,000, the BH77 is not the most affordable backhoe attachment on the market. However, its performance and durability make it a worthwhile investment for those who need to get serious digging done.
Official Website: Kubota
Conclusion
This concludes our coverage of the Kubota bh77 Backhoe price, specifications, review, and key features. If you have any questions about this post, please comment below, and we will get back to you as soon as possible.
FAQs
The Kubota BH77 is a backhoe attachment designed for use with compatible Kubota tractors. It is a versatile implement that allows for digging, trenching, and other excavation tasks.
The digging depth of the Kubota BH77 backhoe attachment is approximately 91.8 inches (231 cm). This depth allows for effective excavation in a variety of applications.
The reach of the Kubota BH77 backhoe attachment is approximately 113 inches (287 cm). This reach enables efficient digging and loading operations, even in hard-to-reach areas.
The operating weight of the Kubota BH77 backhoe attachment is approximately 1,085 pounds. This weight may vary slightly depending on the specific configuration and optional equipment.
The Kubota BH77 backhoe attachment typically features hydraulic controls that allow for precise operation. These controls enable the operator to manipulate the boom, arm, bucket, and other functions with ease.
Yes, the Kubota BH77 backhoe attachment is designed for easy attachment and detachment. It typically utilizes a three-point hitch system and requires minimal effort and time to connect or disconnect from the tractor.
The horsepower requirement for the Kubota BH77 backhoe attachment depends on the specific tractor model it is being used with. Typically, it is advised to purchase a tractor with 20-30 horsepower as an ideal way of controlling a backhoe effectively.
The Kubota BH77 backhoe attachment is specifically designed for use with Kubota tractors. While it may be possible to modify or adapt it for use with other tractor brands, it is recommended to consult with a Kubota dealer or manufacturer to ensure compatibility and proper installation.
Yes, the Kubota BH77 backhoe attachment can be equipped with different bucket options based on the specific requirements of the task. Common bucket options include standard digging buckets, narrow buckets, and ditch cleaning buckets.
Regular maintenance for the Kubota BH77 backhoe attachment includes lubricating pivot points, checking and adjusting hydraulic fluid levels, inspecting hoses and connections for leaks, and keeping the attachment clean from dirt and debris. Adhere to manufacturer specifications as detailed in your operator manual.
Yes, the Kubota BH77 backhoe attachment is suitable for trenching. With its digging depth and reach, it is capable of efficiently excavating trenches for various applications, such as utilities installation, drainage systems, or landscaping projects.
No, the Kubota BH77 is a specific model of backhoe attachment designed by Kubota for use with their tractors. It is not compatible with backhoe attachments from other manufacturers without appropriate modifications or adapters.
The Kubota BH77 backhoe attachment is designed to be used specifically with Kubota tractors. However, it is not directly compatible with other Kubota implements such as loaders or mowers. Each implement is typically designed for specific attachment points and hydraulic connections.
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.