John Deere Z930M ZTrak Zero Turn Mower key specs
The John Deere Z930M ZTrak Zero Turn Mower is a commercial-grade mower with the following key specifications:
- Engine Manufacturer/model: FX801V
- Engine Power: Gross at 3,600 rpm / 25.5 hp / 19 kW
- Fuel tank capacity: 11.5 U.S. gal. / 43.5 L
- Mower deck Size: 54, 60 in. / 137, 152 cm
- Blade tip speed: Approximately 18,000 fpm / 60 in. rear discharge: approximately 15,000 fpm
- Transmission: Hydrostatic
- Speed range: 0-10 mph / 0-16.1 km/h
- Drive wheels: 24×12-12
- Caster wheels: 13×6.5-6
- Warranty: 36 months or 1200 hours, whichever comes first / First 24 months, no hour limitation
- 7-Iron(TM) PRO deck
- Mulch on Demand(TM), Available
- Propane Option Available
John Deere Z930M ZTrak Zero Turn Mower Price
John Deere Z930M ZTrak Zero Turn Mower original price; $11,689 (2021 )
Features
- Powerful 25.5 horsepower (19 kilowatts) commercial-grade engine provides class-leading performance and fuel economy.
- Pressed from a single piece of steel, 7-IronTM PRO Side-Discharge decks provide superior durability and mowing performance.
- Available Mulch On Demand™ deck.
- The FastBackTM PRO rear-discharge mower deck improves productivity, safety, and trimming ability.
- Three seat options with ComfortGlideTM front/rear suspension provide superior operator comfort.
John Deere Z930M ZTrak Zero-Turn Mower Specifications
Key Specs
Engine Manufacturer/model | FX801V |
Engine power | Gross at 3,600 rpm 25.5 hp 19 kW |
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
Mower deck size | 54, 60 in. 137, 152 cm |
Blade tip speed | Approximately 18,000 fpm 60 in. rear discharge: approximately 15,000 fpm |
Transmission | Hydrostatic |
Speed range | 0-10 mph 0-16.1 km/h |
Drive wheels | 24×12-12 |
Caster wheels | 13×6.5-6 |
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Engine
Manufacturer/Model | FX801V |
Power | Gross at 3,600 rpm 25.5 hp 19 kW |
Displacement | 52 cu in. 852 cc |
Cylinders | Two |
Crankcase capacity | With filter, 2.4 U.S. qt 2.3 L |
Oil filter | Full flow, replaceable |
Lubrication | Full pressure |
Cooling | Air |
Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
Fuel system
Fuel type | Gasoline |
Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr |
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
Fuel tank switch/shut-off valve | Yes |
Electrical system
Charge system | 20 amp |
Battery voltage | 12 V |
Cold cranking amp | 300 amp |
Hour meter | Standard, digital |
Operator presence starting system | Brake-N-Go (hand) |
Drivetrain
Transmission | Hydrostatic |
Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor |
Travel speed | Speed range 0-10 mph 0-16.1 km/h Forward 0-10 mph 0-16.1 km/h Reverse 0-4.5 mph 0-7.2 km/h |
Speed and direction control | Twin levers |
Hydraulic capacity | 5.9 U.S. qt 5.6 L |
Filter | Internal, replaceable |
Buyer’s note
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Tires
Drive wheels | 24×12-12 |
Load rating | 4 PR |
Brakes
Dynamic braking | Twin levers |
Park brake | Internal wet disk integrated in the transmission |
Park brake actuation | Hand brake |
PTO
Type | Electro-magnetic, 225 lb-ft 305 Nm |
Drive | V-belt |
Mower decks
Size | 54, 60 in. 137, 152 cm |
Deck thickness | 7 gauge 0.18 in. 4.6 mm |
Discharge | Side, Mulch On Demand™ system, rear |
Height-of-cut range | Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm |
Cutting width | 54, 60 in. 137, 152 cm |
Blades
Length | Varies by deck size |
Thickness | 0.25 in. 0.64 cm |
Blade tip speed | Approximately 18,000 fpm 60 in. rear discharge: approximately 15,000 fpm |
Number | Three |
Wheels
Caster wheel type | Flat free |
Caster wheels | 13×6.5-6 |
Front anti-scalp rollers | RH, center, LH |
Rear anti-scalp rollers | Standard |
Dimensions
Length | 84 in. 213 cm |
Width | With chute down, 68, 74 in. 173, 188 cm Rear discharge, 63.5 in. 161.3 cm |
Height | With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm |
Weight | 1,275 to 1,365 lb 578 to 619 kg |
Operation
Rollover protective structure (ROPS) | Yes |
Slope operating limit | 20 degrees (10 degrees with material collection system installed) |
Additional information
Date collected | 1-Sep-2020 |
John Deere Z930M ZTrak Zero Turn Mower Review
The John Deere Z930M ZTrak Zero Turn Mower is a professional-grade zero-turn mower tailored for expansive properties and rigorous tasks.
It’s driven by a 25.5-horsepower engine and boasts a 60-inch cutting deck. Furthermore, the Z930M offers several additional attributes that render it a favored option among commercial landscapers and other industry professionals.
For more details check out this YouTube Video
Final Word
This was the John Deere Z930M ZTrak zero turn mower price, specs, review and features. I hope that you read this article. If you have any questions about the John Deere Z930M ZTrak zero turn mower please leave a comment. I love helping everyone. Thanks!
FAQs
Is a John Deere Z930M fuel injected?
yes, The Z930MEFI is powered by an electronic fuel-injected vertical shaft engine 26.5 horsepower (19.7 kW).
What kind of oil does a John Deere z930m take?
John Deere recommends SAE30 or SAE40 for Z300-series motors. AMSOIL Small Engine Synthetic 10W-30 and 10W-40 can be used in place of straight 30 or 40-weight oils. Deere recommends changing the Z300 Series oil every 50 hours or yearly (whichever comes first).