John Deere X590 Specs, Prices & Review 2023

John Deere X590 Specs:  The John Deere X590 is an outdoor lawn tractor in the John Deere X-series. Since 2016, the tractor has been produced at the John Deere Horicon Works plant in Horicon, Wisconsin, USA.

The John Deere X590 lawn mower used its Kawasaki, the FS730V EFI vertical motor. The Kawasaki FS730V EFI is 726 cubic centimeters (44.3 cubic inches) V-twin air-cooled 90deg 4-stroke Internal combustion gasoline small engine with a vertical shaft.

John Deere X590 specs

The John Deere X590 is equipped with a Kawasaki FS730 EFI gasoline 2-cylinder, air-cooled vertical-shaft V-Twin engine, Bore and stroke measure 78.0 millimeters (3.07 inches) and 76.0 millimeters (2.99 in), respectively, the compression ratio is 8.2:1 which generated 25.5 HP (19.0 kW)gross power at 3,600 rpm.

The John Deere X590 tractor is featured Kanzaki K72A belt-driven hydraulic transmission, Wet disk brakes, an independent PTO shaft fitted with an electric clutch, a mechanical rear differential lock, and power steering, well as 16.7 Liters fuel tank (4.4 US gal).

The following attachments are available for The John Deere X590 garden tractor

  • Mid-mount John Deere 48 (Accel Deep) 1,220 mm (48 inches) mower deck featuring 3-blade and hydraulic lift
  • Mid-mount John Deere 54 (Accel Deep) 1370 mm (54 inches) mower deck with three blades and a manual lift

John Deere X590 Lawn Tractor Price

John Deere X590 Lawn Tractor

Price: $9,599.00

John Deere X590 Lawn Tractor Key Specs

Engine power 25.5 hp
19 kW
Oil change No-tools oil drain with replaceable filter
Engine manufacturer/model FS730 EFI
Transaxle type K72 hydrostatic integrated with transaxle
Transaxle control Twin Touch™ pedals
Rear tires 24×12-12 HDAP
Lift system type Hydraulic
Cutting width Accel Deep™ mower deck, 54 in.
137 cm
U.S. warranty 4-year/500-hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

John Deere X570 with 48-in. Deck Lawn Tractor Specifications

Power 25.5 hp
19 kW
Displacement 44.3 cu in.
726 cc
Manufacturer/model FS730 EFI
Type Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
Cylinders V-twin, cast-iron liners
Governor Constant-speed electronic throttle control
Choke/speed control No choke required
Cooling method Air
Air cleaner Dry, replaceable with foam precleaner
Oil change No-tools oil drain with replaceable filter

Fuel system

Type Gasoline
Fuel delivery Open-loop electronic fuel injection (EFI)
Fuel gauge Gauge on dash
Fuel tank location Rear
Fuel fill opening On left fender, 3 in.
7.6 cm
Fuel tank capacity 4.4 U.S. gal.
16.7 L

Electrical system

Battery 12 V
500 CCA
Charging system Flywheel alternator, regulated, 15 amp
Engine starter Solenoid shift
Hourmeter Yes
Headlights Two standards, incandescent, 27 W
Taillights or reflector Reflectors
Backup lights No
Rear work lights No
12-V outlet Yes

Transaxle

Type K72 hydrostatic integrated with transaxle
Control Twin Touch™ pedals
Cruise control Yes, the button on the dash
Oil cooler Fins and fan on the transaxle
Oil filter Yes, replaceable
Differential lock Standard
Forward speed 0-7.2 mph
0-11.6 km/h
Reverse speed 0-5.2 mph
0-8.4 km/h
Brakes Internal wet disc

Chassis

Frame Welded heavy-duty
Primer/paint E-coat/powder
Weight bracket Standard front and rear – each holds up to four Quik-Tatch weights, 42 lb
19 kg
Receiver hitch No
Front axle Cast iron front axle, front wheel ball bearings
Spindle bushings Metal, replaceable
Front tires 16×6.5-8 turf
Rear tires 24×12-12 HDAP
Hood material Fully enclosed, molded-in color material reduces sound, will not rust or dent
Fender deck material Stamped steel
Floor mats Sure-grip rubber
Storage Yes, under-seat and covered toolbox
Service interval decal Yes
Fender handles/grips Handles
Cup holder Yes
Equipment mounting Yes, heavy-duty

Steering

Type Power, hydraulic
Four-wheel steer Not available on this model
Steering wheel 14 in.
35.6 cm
Tilt steering wheel Standard, five position
Turning radius 22 in.
55.9 cm
Uncut circle radius 24 in.
61 cm

Seat

Type Cut-and-sewn high-back
Seat back height 21 in.
53 cm
Armrests Optional
Fore-aft adjustment While seated, slide rail, 15-position, 6.6 in.
17 cm
Seat suspension Tilt, two coil springs, three-position no-tools adjustment for operator weight

Lift system

Type Hydraulic
Hydraulic outlets No
Mower cut height 13 positions, 1-4 in.
2.5-10.2 cm
Cut height increments 0.25 in.
0.64 cm
Preset cut height Yes

Mower deck

Type Side discharge
Cutting width Accel Deep™ mower deck, 54 in.
137 cm
Construction Stamped steel deck shell
Mower deck material 10 gauge
0.135 in.
3.4 mm
Mower wash port Yes
Mower drive system Electric power take-off (PTO) clutch, in-line belt
Mower wheels Four
Mower wheel adjustment Seven-position, spring-loaded pin
Mower level adjustment Exact Adjust ports and onboard deck-leveling gauge

Mower attachability

Type Roll under tractor
Front draft arms Attached with spring pins at two points
Rear draft arms Quick-pull pins
Mower wheels rotate Yes, 90 degrees for easy mower removal
Drive system Dual belt

Safety

Meets ANSI standard Yes
Meets OPEI standard Yes
Backup protection Reverse Implement Option (RIO)
Safety video Yes

Buyer’s notes

Notes Heavy-duty garden tractor transaxle
Convenient power steering and hydraulic lift
Built-in front and rear weight brackets
Warranty 4-year/500-hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

Optional equipment

Mowers 54A (standard)
Rear bagger 7, 14, 19 bu
247, 493, 670 L
Powered material collection Power Flow™ blower
Mulching system Yes, MulchControl™
Front thatcher 38, 46, 54 in.
96.5, 116.8, 137.2 cm
Front blade 48 in.
121.9 cm
Snowblower Two-stage, 47 in.
119.4 cm
Rotary tiller Mechanical, 30 in.
76.2 cm
Hydraulic, 42 in.
106.7 cm
Sleeve hitch Yes, implements include a box scraper, rear blade, plow, disk, and cultivator
Plow, moldboard Yes
Box scraper Yes
Cultivator Yes
Rear blade Yes
Sprayer Tow-behind, 15, 25 U.S. gal.
56.8, 94.6, 170.3 L
Mounted, 25 U.S. gal.
94.6 L
Spreader 125, 175 lb
57.7, 79.4 kg
Mounted, 125 lb
57.7 kg
Front bumper Standard front bumper/weight bracket
Brush guard Yes
Weather protection Weather enclosure
Sun canopy Yes
Bucket holder Yes, double bucket
Grass striping Lawn striping kit
Tractor shovel 40 in.
101.6 cm
Tow-behind tools 19

Dimensions

Height 52.25 in.
132.7 cm
Overall length 79 in.
201 cm
Wheelbase 51.2 in.
130 cm
Width with mower 68.4 in.
174 cm
Width with mower (deflector raised for storage) 59.4 in.
151 cm
Width without mower 41 in.
104.1 cm
Weight Mower, no fuel: 805 lb
365 kg

Additional information

Manufacturing location Horicon, Wisconsin, USA
Date collected 27-Jul-2020

John Deere X590 Lawn Tractor Reviews

Final Word

Everything you wanted to know about the John DeereX500 Lawn Tractors from its pricing to its lifting and fuel capacities—is right here. This page contains a wide variety of information, all of which is authentic and trustworthy and will help you.

Nonetheless, do let me know in the comments if you have any queries concerning the content of this article, and don’t forget to return for more interesting data like this. We appreciate you checking out our page

FAQs

FAQ

Who makes the engine for John Deere X590?

John Deere  X590 lawn tractors use Kawasaki air-cooled V-Twin engines, models X570, X580, and X584 are rated at 24 horsepower each, and the X590 is rated at 25.5 horsepower.

Is the John Deere X590 liquid cooled?

John Deere Lawn Tractor X590 with 48′ Accel Cutting Deck

26HP liquid-cooled engine with The John Deere exclusive torque Power System delivers the most efficiency and output. Liquid cooling ensures greater engine longevity, quiet running, and improved fuel efficiency.


Warning: Constant WP_USE_THEMES already defined in /srv/stackserver/unix1642081247/htdocs/index.php on line 14