John Deere 4430 Price, Specs, Serial Numbers, Reviews, Horsepower, Engine Oil Capacity, Attachments, History, Features & Pictures
The John Deere 4430 is a row-crop tractor from Generation II Series (4230, 4430, 4630) made in Waterloo, Iowa, USA, from 1973 to 1977. It runs on a 6.6L 6-cylinder diesel engine with about 125 horsepower at a rated 2200 rpm.
The tractor uses diesel fuel and weighs around 9732 to 11350 pounds with a height of 2,890 mm (113.8 in). In 1977, it was priced at $23,000.
John Deere 4430 Row-Crop tractor featured power steering, partially synchronized, hydraulic wet disc brakes, 174.1 L fuel tank capacity, 8 forward and 2 reverse gears, 4550 lbs rear lift capacity, and 17 Qts (16.1 L) Engine oil capacity.
John Deere 4430 tractor attachments include John Deere 158 Loader and John Deere 148 Loader.
Now, let’s find out the Row-Crop Tractor Price, Parts Specs, Reviews, Serial numbers & Images.
John Deere 4430 Price
John Deere 4430 Original Price: $23,000 (1977 )
John Deere 4430 Specs
History
| Manufacturer: | John Deere |
| Type: | Generation II Series, Row-Crop tractor |
| Factory: | Waterloo, Iowa, USA |
| Model Year | 1973-1977 |
| Variants | |
| 4430 | row-crop |
| 4430 Hi-Crop | high clearance |
John Deere 4430 Power
| PTO (claimed): | 125.88 hp [93.9 kW] |
| Drawbar (tested): | 104.99 hp [78.3 kW] |
| PTO (tested): | 125.88 hp [93.9 kW] |
John Deere 4430 Engine
| Engine | John Deere turbocharged diesel 6-cylinder liquid-cooled inline |
| Displacement: | 404 ci [6.6 L] |
| Bore/Stroke: | 4.25×4.75 inches [108 x 121 mm] |
| Fuel system: | direct injection |
| Air cleaner: | dry with a secondary element |
| Pre-heating: | ether injection |
| Compression: | 15.5:1 |
| Rated RPM: | 2200 |
| Idle RPM: | 800-2200 |
| Operating RPM: | 1500-2200 |
| Firing order: | 1-5-3-6-2-4 |
| Starter: | Delco-Remy electric |
| Starter volts: | 12 |
| Coolant capacity: | 30 qts [28.4 L] |
| 32 qts [30.3 L] (with heater) | |
| Intake valve clearance: | 0.018 inches [0.457 mm] |
| Exhaust valve clearance: | 0.028 inches [0.711 mm] |
| Oil capacity: | 17 qts [16.1 L] |
| Oil change: | 100 h |
PTO
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| 1000 | |
| Engine RPM: | 540@2200 1000@2200 |
Mechanical
| Chassis: | 4×2 2WD |
| 4×4 HFWD 4WD | |
| Steering: | power |
| Brakes: | hydraulic wet disc |
| Cab: | Optional Roll-Gard ROPS. Optional Sound Gard body and cab. |
| Transmissions: | 8-speed partially synchronized |
| 16-speed partial power shift | |
| 8-speed full power shift |
John Deere 4430 Transmission
| Transmissions overview | |
| 8-speed partially synchronized | |
| 16-speed partial power shift | |
| 8-speed full power shift | |
| 13-speed creeper |
Transmission: John Deere Syncro-Range | |
| Type: | partially synchronized |
| Gears: | 8 forward and 2 reverse |
| Clutch: | Perma-Clutch hydraulic wet disc |
| Oil capacity: | 44 qts [41.6 L] |
Transmission: John Deere Quad-Range | |
| Type: | partial power shift |
| Gears: | 16 forward and 6 reverse |
| Clutch: | hydraulic wet disc |
| Oil capacity: | 44 qts [41.6 L] |
Transmission: John Deere Power Shift | |
| Type: | full power shift |
| Gears: | 8 forward and 4 reverse |
| Clutch: | hydraulic wet discs |
| Oil capacity: | 40 qts [37.9 L] |
Transmission: Syncro-Range Creeper | |
| Type: | creeper |
| Gears: | 13 forward and 4 reverse |
Hydraulics
| Type: | closed center |
| Capacity: | 11 gal [41.6 L] |
| 10 gal 37.9 L (Power Shift) | |
| Pressure: | 2250 psi [155.1 bar] |
| Valves: | 1 to 3 |
| Pump flow: | 22 gpm 83.3 lpm |
John Deere 4430 Dimensions
| Wheelbase: | 106.6 inches [270 cm] |
| Length: | 160.75 inches [408 cm] |
| Width: | 89.625 inches [227 cm] (axle) |
| 70.8 inches [179 cm ](fenders) | |
| 82 inches [208 cm (cab fenders) ] | |
| Rear tread: | 60 to 90 inches [152 to 228 cm] |
John Deere 4430 Weight
| ROPS Shipping: | 9732 lbs [4414 kg] |
| Cab Shipping: | 10762 lbs [4881 kg] |
| Operating: | 11350 lbs [5148 kg] |
| Ballasted: | 15060 lbs [6831 kg] |
John Deere 4430 Height
| Steering wheel: | 85.25 inches [216 cm] |
| Cab: | 114 inches [289 cm] |
| ROPS Exhaust: | 109.3 inches [277 cm] |
| Cab Exhaust: | 125.25 inches [318 cm] |
John Deere 4430 Tires
| Ag front: | 10.00-16 |
| Ag rear: | 18.4-38 |
| Ag front: | 7.50-15 |
| Ag rear: | 20.8-34 |
John Deere 4430 Electrical
| Ground: | negative |
| Charging system: | alternator |
| ROPS Charging amps: | 37 |
| Cab Charging amps: | 55 |
| Batteries: | 2 |
| Battery CCA: | 800 |
| Battery volts: | 6 |
| Battery Group: | 5D |
John Deere 4430 Serial Numbers
| 1973: | 1000 |
| 1974: | 17500 |
| 1975: | 33050 |
| 1976: | 47222 |
| 1977: | 62960 |
The serial number plate on the John Deere 4430 is located at the rear, on the right side, just above the PTO shaft. | |
John Deere 4430 Attachments
Some of the most common attachments for this tractor may include front-end loaders, rear blades, rotary cutters, etc.
John Deere 148 Loader | |
| Loader weight: | 1350 lbs [612 kg] |
| Height (to pin): | 126 inches [320 cm] |
| Clearance, dumped bucket: | 102 inches [259 cm] |
| Dump reach: | 32 inches [81 cm] |
| Dump angle: | 38° |
| Clearance, level bucket: | 121 inches [307 cm] |
| Rollback angle: | 11° |
| Breakout force (lift): | 4700 lbs [2131 kg] |
| Lift to full height (at pin): | 3100 lbs [1406 kg] |
| Bucket capacity: | 0.5 cup yd [0.4 cu m] |
| 0.6 cu yd [0.5 cu m] | |
| 0.8 cu yd [0.6 cu m] | |
| 0.9 cu yd [0.7 cu m] | |
| Bucket width: | 60 inches [152 cm] |
| 72 inches [182 cm] | |
| 84 inches [213 cm] | |
| 96 inches [243 cm] | |
John Deere 158 Loader | |
| Loader weight: | 1771 lbs [803 kg] |
| Height (to pin): | 156 inches [396 cm] |
| Clearance, dumped bucket: | 132 inches [335 cm] |
| Dump reach: | 32 inches [81 cm] |
| Dump angle: | 37° |
| Clearance, level bucket: | 151 inches [383 cm] |
| Rollback angle: | 12° |
| Breakout force (lift): | 5000 lbs [2268 kg] |
| Lift to full height (at pin): | 3800 lbs [1723 kg] |
| Bucket capacity: | 0.5 cu yd [0.4 cu m] |
| 0.6 cu yd [0.5 cu m] | |
| 0.8 cu yd [0.6 cu m] | |
| 0.9 cu yd [0.7 cu m] | |
| Bucket width: | 60 inches [152 cm] |
| 72 inches [182 cm] | |
| 84 inches [213 cm] | |
| 96 inches [243 cm] | |
John Deere 4430: Official Website
Also, check
John Deere 4430 Problems & Solution
John Deere 4430 Problems
John Deere tractors are popular and effective, but neglecting maintenance and rough usage of the JD 4430 can lead to various issues. Engine problems, drive, motor, and clutch issues may arise.
Engine starting and overheating can be serious concerns. Steering might be problematic if it turns too fast or malfunctions. The clutch often slips, and the motor may refuse to start.
Problem 1: The Engine Doesn’t Crank Over
In this case, when you try to start the tractor, the engine won’t turn over. Also, the engine will sometimes start, but it can be slow to start.
Reasons
Your machine is having this problem because you are putting the wrong fuel in it. This can also happen if the high-pressure fuel pump is broken or if the speed of the fuel pump is off.
Solution
Make sure you use the right fuel in your tractor. John Deere 4430 runs on diesel, so it is recommended that you do not use other fuels.
Check the fault in the high-pressure fuel pump. Inspect the high-pressure fuel pump and see if fuel is on the injector. If you find no fuel on the injector, that means the high-pressure fuel pump is faulty. Repair the pump with a technician.
If the high-pressure pump works fine, the fuel pump timing is the main culprit. Check if there is smoke coming out from the fuel injector, which is an indicator of wrong fuel timing. If smoke is found, set the correct fuel pump timing.
Problem 2: Engine Not Starting
When you try to start the tractor, the engine cranks but doesn’t start. This is another big problem with the engine.
Reasons
If the speed of the starter is slow, you will have trouble getting the John Deere 4430 to start. Corrosion and broken connections can slow down the starter.
Also, your John Deere 4430 engine might not start if the fuel lines are clogged, the fuel filter is dirty, or the piston rings are broken.
Check each of these parts to find out which one is causing this problem with your tractor.
Problem 3: The Engine Starts Hard
If you have trouble starting the engine of your John Deere tractor often or sometimes, you need to figure out what’s wrong.
Reasons
If you have this trouble, it’s because the battery isn’t charged enough to give the engine enough power. If this happens often with your tractor, it could be because the fuel line is clogged or the fuel filter is dirty.
It could also be because the injector is clogged or broken. This can also happen if you let your tractor sit still for a long time.
Solution
- This problem might be fixed by charging the battery in your tractor.
- But if you find that the battery doesn’t hold a charge for long, it could be old or broken. Depending on how good it is, the battery in your John Deere 4430 can last up to 6–8 years. If the battery is old, you should buy a new one.
- Now, you should clean the fuel line and injector. Make sure the injector is not broken. If it is, you’ll need to get a new one. Also, if the fuel filter is dirty, you should repair it.
- Try not to leave the tractor sitting still for too long. If you don’t have to drive the car for at least an hour, stop it.
Problem 4: Engine Knocks
When you drive the tractor, the engine makes a knocking sound. The sound can keep getting louder as time goes on.
Reasons
A low engine oil level is responsible for this problem.
Solution
Check the oil amount in the engine and add more if you need to. Before putting new oil in the engine, it’s best to clean out the old oil.
- Remove the old oil by unplugging the drain plug.
- Reinstall the drain plug and refill the new oil. John Deere dealers suggest John Deere Plus-50 oil for this tractor model.
John Deere 4430 Review
The John Deere 4430 is a dependable and flexible tractor that works well for various farming jobs. It’s a practical choice for farmers and ranchers who want a tractor that’s both budget-friendly and capable.
The 4430 was among the first tractors to come with a SoundGard cab and a turbocharged engine. It’s fairly straightforward to use and take care of.
If you’re thinking about getting a John Deere 4430, make sure to carefully check the tractor for any signs of wear or damage. It’s also a good idea to have a qualified mechanic inspect the tractor before making the purchase.For a full review, please check this YouTube video Here.
Final Words
The John Deere 4430 offers about 108.46 horsepower of PTO power, with a maximum of 125 horsepower.
The common problems with the John Deere 4430 include engine problems, steering problems, motor problems, and clutch problems.
The John Deere 4430 has a 6620 cc engine, which is 404 cubic inches.
The weight of the John Deere 4430 is approximately 11,000 pounds
The John Deere 4430 is a row crop tractor that can move big tools easily across fields.
If your John Deere 4430 is hard to start when it’s cold, it could be because the battery is weak, the glow plug is broken, or the fuel filter is jammed.
The main torque of the John Deere 4430 is 150 ft-lbs or 203.4 N-m.
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.