John Deere 4400 HP, Price, Specs, Review, Horsepower, Serial Numbers, Problems, Engine Oil Capacity, Attachments & Pictures
The John Deere 4400 is a compact 4WD utility tractor of the 4000 Compact series. This tractor was made by John Deere in Augusta, Georgia, USA from 1998 until 2001.
John Deere 4400 Compact Utility tractor is equipped with a Yanmar 3TNE88 diesel 3-cylinder liquid-cooled engine, which produces 35.7 hp [26.6 kW] power at a rated rpm of 2700.
The John Deere 4400 Compact Utility Tractor featured a Yanmar 1.6L 3-cyl diesel engine, 12 forward and reverse gears, 4×4 MFWD 4WD, power steering, and 4.5 qts (4.3 L) oil capacity.
John Deere 4400 Compact Utility Tractor attachments include a 60″ mid-mount mower deck, a 72″ mid-mount mower deck, a Front-end loader, and Backhoe.
Now, let’s find out the John Deere 4400 Specs, Price, Hp, Review, Attachments, Weight, Features & Images, and more. I hope it will be useful to you.
| John Deere 4000 Series: | 4300 ← | 4400 | → 4500 |
| 4410 ↓ |
John Deere 4400 Tractor Price
John Deere 4400 Original Price: $17,500.00 USD
Here is some Information on where you can find John Deere 4400 tractors for sale:
- Fastline: Fastline has a variety of new and used John Deere 4400 tractors for sale. Prices range from $12,999 to $15,000.
- TreeTrader.com: TreeTrader.com has nine listings of new and used John Deere 4400 tractors for sale.
- MarketBook.ca: MarketBook.ca has eight listings of John Deere 4400 tractors for sale, with prices ranging from CAD $20,245 to $29,50
John Deere 4400 Serial Numbers
| 1998: | 140000 |
| 1999: | 240001 |
| 2000: | 340001 |
| 2001: | 440001 |
John Deere 4400 Review Video
John Deere 4400 Specs
Here, is Specification for John Deere 4400 tractor:
John Deere 4400 HISTORY:
| Manufacturer: | John Deere |
| Type: | Compact Utility tractor |
| Factory: | Augusta, Georgia, USA |
John Deere 4400 Engine Details:
| engine | Yanmar 3TNE88 diesel 3-cylinder liquid-cooled |
| Displacement: | 100.2 ci 1.6 L |
| Power (gross): | 35.7 hp 26.6 kW |
| Fuel system: | direct injection |
| Air cleaner: | dry |
| Pre-heating: | air heat |
| Compression: | 18:1 |
| Rated RPM: | 2700 |
| Idle RPM: | 950-2810 |
| Operating RPM: | 950-2700 |
| Starter volts: | 12 |
| Starter power: | 1.9 hp 1.4 kW |
| Coolant capacity: | 6.1 qts 5.8 L |
| Oil capacity: | 4.5 qts 4.3 L |
| Oil change: | 200 h |
John Deere 4400 Transmission:
| Transmission | |
| Transmission: | SyncReverser |
| Type: | partially synchronized |
| Gears: | 12 forward and reverse |
| Clutch: | wet discs, two clutch packs with nine four-inch discs each |
| Oil capacity: | 25.2 qts 23.8 L |
| Transmission | |
| Type: | hydrostatic |
| Gears: | infinite (3-range) forward and reverse |
| Oil capacity: | 27.2 qts 25.7 L |
John Deere 4400 Capacity:
| Fuel: | 10 gal 37.9 L |
| Hydraulic system: | 6.3 gal 23.8 L (gear) |
| 6.8 gal 25.7 L (hydro) |
|
| Front axle: | 4.7 qts 4.4 L |
John Deere 4400 Hydraulics:
| Type: | open center | ||||
| Capacity: | 6.3 gal 23.8 L (gear) |
||||
| 6.8 gal 25.7 L (hydro) |
|||||
| Pressure: | 2500 psi 172.4 bar |
||||
| Valves: | 2 | ||||
| Pump flow: | 8.3 GPM 31.4 lpm |
||||
| Total flow: | 13.3 GPM 50.3 lpm |
||||
| Oil type: |
|
||||
| Steering flow: | 5 GPM 18.9 lpm |
John Deere 4400 Power:
| Engine (gross): | 35.7 hp 26.6 kW |
| Engine (net): | 33.7 hp 25.1 kW |
| Gear PTO (claimed): | 29.5 hp 22.0 kW |
| Hydro PTO (claimed): | 28.5 hp 21.3 kW |
John Deere 4400 PTO:
| Rear PTO: | independent |
| Clutch: | wet disc |
| Rear RPM: | 540 |
| Engine RPM: | [email protected] |
| Mid PTO: | optional |
| Mid RPM: | 2100 |
| Engine RPM: | [email protected] |
John Deere 4400 Tractor Hitch:
| Rear Type: | I |
| Rear lift (at 24″/610mm): | 2,200 lbs 997 kg |
John Deere 4400 Tires:
| Ag front: | 7.00×14 |
| Ag rear: | 11.2×24 |
John Deere 4400 Mechanical:
| Chassis: | 4×4 MFWD 4WD |
| Differential lock: | mechanical |
| Steering: | power |
| Brakes: | differential wet disc |
| Cab: | Two-post ROPS |
| Transmissions: | 12-speed partially synchronized |
| hydrostatic |
John Deere 4400 Dimensions:
| Wheelbase: | 68 inches 172 cm |
| Length: | 117 inches 297 cm |
| Width: | 50 inches 127 cm |
| Clearance (rear axle): | 13.4 inches 34 cm |
John Deere 4400 Height:
| Hood: | 53.3 inches 135 cm |
| ROPS: | 84 inches 213 cm (fixed) |
| 90 inches 228 cm (folding) |
John Deere 4400 Weight:
| Shipping: | 2,900 lbs 1315 kg |
| Max Drawbar: | 562 lbs 254 kg |
| Max front axle: | 3,197 lbs 1450 kg |
| Max rear axle: | 4,409 lbs 1999 kg |
John Deere 4400 Battery:
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40 |
| Battery CCA: | 500 |
| Battery volts: | 12 |
John Deere 4400 ATTACHMENTS
60″ Mower deck |
|
| Type: | mid-mount John Deere |
| Cutting width: | 60 inches 152 cm |
72″ Mower deck |
|
| Type: | mid-mount John Deere |
| Cutting width: | 72 inches 182 cm |
John Deere 420 Loader |
|
| Height (to pin): | 87.6 inches 222 cm |
| Clearance, dumped bucket: | 66.1 inches 167 cm |
| Dump reach: | 30.3 inches 76 cm |
| Dump angle: | 43° |
| Reach at the ground: | 53.6 inches 136 cm |
| Rollback angle: | 23° |
| Breakout force (at 800mm): | 2,693 lbs 1221 kg |
| Lift to full height (at 800mm): | 1,195 lbs 542 kg |
| Raise time to height: | 2.9 s |
| Bucket dump time: | 1.6 s |
| Lowering time: | 2.4 s |
| Rollback time: | 2.2 s |
John Deere 430 Loader |
|
| Height (to pin): | 101.4 inches 257 cm |
| Clearance, dumped bucket: | 78.3 inches 198 cm |
| Dump reach: | 25.6 inches 65 cm |
| Dump angle: | 45° |
| Reach at ground: | 57.5 inches 146 cm |
| Rollback angle: | 30° |
| Breakout force (at 800mm): | 3,299 lbs 1496 kg |
| Lift to full height (at 800mm): | 1,259 lbs 571 kg |
| Raise time to height: | 3.5 s |
| Bucket dump time: | 1.8 s |
| Lowering time: | 2.5 s |
| Rollback time: | 2.3 s |
John Deere 47 Backhoe |
|
| Backhoe type: | John Deere 47 Backhoe |
John Deere 48 Backhoe |
|
| Backhoe type: | John Deere 48 Backhoe |
| Weight: | 1517 lbs 688 kg |
| Transport height: | 81 inches 205 cm |
| 2-Foot flat digging depth: | 102 inches 259 cm |
| Reach from pivot: | 133 inches 337 cm |
| Loading height: | 82 inches 208 cm |
| Bucket Rotation: | 180 |
| Swing Arc: | 180 |
| Bucket force: | 3730 lbs 1691 kg |
| Dipperstick force: | 2435 lbs 1104 kg |
John Deere 4400 Problems And Solution
Here are some common problems with the John Deere 4400 and their possible solutions:
Engine issues:
If the engine is not starting or running properly, check the fuel system for clogs or fuel quality problems.
Ensure the air filter is clean and the spark plugs are in good condition. If the problem persists, consult a professional technician for further diagnosis and repair.
Electrical problems:
If there are electrical malfunctions, such as lights not working or gauges not functioning, check the fuses and wiring connections.
Replace any blown fuses and repair any damaged wires. If the issue persists, seek assistance from a qualified technician.
Hydraulic system problems:
If the tractor’s hydraulic system is not functioning correctly, check the hydraulic fluid level and condition. Top up or replace the fluid as necessary.
Inspect the hydraulic lines for leaks and repair them promptly. If the problem persists, consult a professional for troubleshooting and repair.
Transmission issues:
If the tractor has trouble shifting gears or experiences slipping, check the transmission fluid level and condition. Adjust or replace the fluid as needed.
Inspect the linkage and clutch for any wear or damage. If the problem continues, seek professional assistance.
PTO (power take-off) problems:
If the PTO is not engaging or disengaging properly, inspect the PTO switch, wiring, and connections for any faults.
Check for any obstructions or debris around the PTO shaft. If necessary, replace the switch or repair the wiring. Consult a technician if the problem persists.
Quick Fixes For John Deere 4400 Problems
| Problem | Solution |
| Electrical Issues | 1. Charge or replace the battery 2. Replace faulty wiring or connections, alternator, ignition switch starter, wiring, and fuses. |
| Transmission Problems | 1. Change/top off transmission fluid. 2. Replace the faulty clutch, worn gears, or a malfunctioning transmission mount. |
| Engine Issues | 1. Top off oil or coolant. 2. Replace the carburetor, radiator, and spark plugs. 3. Clean and replace the air filter or fuel filter. |
| Hydraulic System Problems | 1. Change fluid or top it off. 2. Repair or replace faulty hydraulic components, and check for leaks. |
| Steering Problems | 1. Replace the power steering pump, steering shaft, or faulty components 2. Top off the power steering fluid level. |
| Hard Starting | 1. Check the glow plugs and fuel pump for damage or wear, and replace them if necessary. 2. Clean or replace clogged fuel filters. |
| Braking Problems | 1. Replace brake pads and calipers. 2. Top off the brake fluid. |
Also, Find Here :
- John Deere 3320
- John deere 7270r
- 4066m john deere
- John deere m specs
- 656 international tractor specs
Final Words
That’s all about the John Deere 4400 Tractor Review, Price, Specification, Price, Attachments, and Features. But If you have any problem regarding this post, then please comment in the below comment box. I will try to solve your problem as soon as possible. Thanks.
FAQs
The resale value for the John Deere 4400 tractor is contingent on many variables, including the condition, age, location, and demand in the market. Resell value between $12,000 to $14,000.
The engine oil capacity of the John Deere 4400 is 4.5 quarts 4.5 L.
The recommended oil for the John Deere 4400 is Low Viscosity Hy-Gard, JDM J20D, or J20C.
The oil capacity for transmission and hydraulic system in John Deere 4400 is approximately 24 liters (6.3 gallons) for gear transmission and approximately12.5 liters (3.3 gallons) for hydrostatic transmission.
As per Machinery Pete, there are currently six used listings available for sale for John Deere 4400 tractors.
To change the engine oil in your John Deere 4400, you should first warm up the engine to allow for easier draining. Then, remove the drain plug and drain the oil into a suitable container. Replace the drain plug and refill it with new oil to the appropriate level.
Slipping gears in your John Deere 4400 can be caused by worn-out gears or low transmission fluid levels. You should check and replace any worn-out gears and ensure that transmission fluid levels are adequate.
The John Deere 4400 is compatible with a variety of attachments, including loaders, backhoes, mowers, and tillers.
Some common problems with the John Deere 4400 include engine overheating, hydraulic issues, poor performance, slipping gears, electrical problems, and PTO and transmission issues.
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.