John Deere 4050 Price, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers, Attachments, History, Features & Pictures
The John Deere 4050 belongs to the 50 series and is available in both 2WD and 4WD configurations. It was produced by John Deere in Waterloo, Iowa, USA, spanning from 1983 to 1988.
John Deere 4050 Row-Crop Tractor was equipped with a John Deere diesel 6-cylinder liquid-cooled engine, And John Deere 5.9L 6-cyl diesel Engine, which delivers 130 hp (96.9 kW) power at rated rpm 2200.
This John Deere 4050 Row-Crop Tractor had a John Deere 7.6L 6-cyl diesel and John Deere 5.9L 6-cyl diesel engine, 4×2 2WD/4×4 MFWD 4WD, power steering, hydrostatic wet disc brakes, 11098 to 12720 pounds weight, 18 qts 17.0 L engine oil capacity, 16 forward and 6 reverse gears.
The John Deere 4050 Row-Crop tractor attachments include John Deere 148 Loader, John Deere 158 Loader, John Deere 260 Loader, and John Deere 280 Loader.
Now, let’s find out the John Deere 4050 Row-Crop Tractor Price, Parts Specs, Reviews, Serial Numbers & Images.
John Deere 4050 Price
John Deere 4050Original Price: $44,700 USD
The sale price of a John Deere 4050 tractor varies depending on the condition, age, and location of the tractor. Although its Average selling price is $36,900 to $43,500
John Deere 4050 Specs
| Manufacturer | John Deere |
| Row-Crop tractor | |
| Built-in | Waterloo, Iowa, USA |
| Model Year | 1983-1988 |
John Deere 4050 Engine
John Deere 7.6L 6-cyl Diesel Engine
| John Deere diesel 6-cylinder liquid-cooled | |
| Displacement: | 466 ci 7.6 L |
| Bore/Stroke: | 4.56×4.75 inches 116 x 121 mm |
| Power: | 130 hp 96.9 kW |
| Air cleaner: | dry |
| Compression: | 17.0:1 |
| Rated RPM: | 2200 |
| Firing order: | 1-5-3-6-2-4 |
| Starter volts: | 12 |
| Oil capacity: | 18 qts 17.0 L |
| Coolant capacity: | 21 qts 19.9 L |
John Deere 5.9L 6-cyl Diesel Engine
| John Deere turbocharged diesel 6-cylinder liquid-cooled | |
| Displacement: | 359 ci 5.9 L |
| Bore/Stroke: | 4.19×4.33 inches 106 x 110 mm |
| Compression: | 17.8:1 |
| Rated RPM: | 2200 |
Capacity
| Fuel: | 46 gal 174.1 L |
| Hydraulic system: | 10.5 gal 39.7 L (2WD Power Shift) |
| 13.5 gal 51.1 L (4WD Power Shift) | |
| 16.0 gal 60.6 L (Quad-Range) |
Tractor Hitch
| Rear Type: | II/I |
| Control: | lower-link draft sensing |
| Rear lift: | 6,294 lbs 2854 kg |
| 7,418 lbs 3364 kg * |
John Deere 4050 Horsepower (Hp)
| Engine: | 130 hp 96.9 kW |
| Drawbar (claimed): | 87 hp 64.9 kW |
| PTO (claimed): | 100 hp 74.6 kW |
| Drawbar (tested): | 94.99 hp 70.8 kW |
| PTO (tested): | 105.89 hp 79.0 kW |
Mechanical
| Chassis: | 4×2 2WD |
| 4×4 MFWD 4WD | |
| Final drives: | inboard planetary |
| Differential lock: | hydraulic rear |
| Steering: | power |
| Brakes: | hydrostatic wet disc |
| Cab: | Sound-Gard cab standard with air-conditioning. Optional four-post Roll-Gard ROPS. |
| Transmissions: | 16-speed partial power shift |
| 15-speed full power shift |
John Deere 4050 Transmission
| Transmission: | John Deere Quad-Range |
| Type: | partial power shift |
| Gears: | 16 forward and 6 reverse |
| Clutch: | Perma-Clutch wet disc |
| Oil capacity: | 64 qts 60.6 L |
| Transmission | John Deere Power Shift |
| Type | full power shift |
| Gears | 15 forward and 4 reverse |
| Clutch | Perma-Clutch wet disc |
| Oil capacity | 42 qts (2WD) 39.7 L |
| 54 qts (4WD) 51.1 L | |
Hydraulics
| Type: | closed center |
| Capacity: | 10.5 gal 39.7 L (2WD Power Shift) |
| 13.5 gal 51.1 L (4WD Power Shift) | |
| 16.0 gal 60.6 L (Quad-Range) | |
| Pressure: | 2277 psi 157.0 bar |
| Valves: | 2 to 3 |
| Pump flow: | 26.5 GPM 100.3 lpm |
PTO
| Rear PTO: | independent |
| Clutch: | hydraulic wet disc |
| Rear RPM: | 540/1000 |
| Engine RPM: | 540@2200 1000@2200 |
John Deere 4050 Dimensions & Weight
| Wheelbase: | 106.7 inches 271 cm (2WD) |
| 105.3 inches 267 cm (4WD) | |
| Length: | 154.1 inches 391 cm (2WD) |
| 164.1 inches 416 cm (4WD) | |
| Width: | 96 inches 243 cm |
| 113 inches 287 cm (optional long axle) | |
| Height: | 114.5 inches 290 cm |
| Shiping weight: | 11,098 lbs 5034 kg |
| Operating weight: | 12,720 lbs 5769 kg (2WD Power Shift) |
| Ground clearance: | 15.75 inches 40 cm |
| Rear axle: | Rack-and-pinion: 3.375 by 96 inches 85 by 2438 mm |
| Rear axle: | Rack-and-pinion: 3.375 by 113 inches 85 by 2870 mm |
John Deere 4050 Tires
| Ag front: | 10.00-16 |
| Ag rear: | 18.4-38 |
Electrical
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 72 |
| 90 (with Sound-Gard cab) | |
| Batteries: | 2 |
| Battery volts: | 6 |
| 12* |
Serial Number
| 1983: | 001000 |
| 1984: | 003501 |
| 1985: | 005001 |
| 1986: | 006501 |
| 1987: | 007001 |
| 1988: | 007501 |
John Deere 4050 Attachments
John Deere 148 Loader | |
| For use on tractors with two-wheel drive. | |
| Loader weight: | 1350 lbs 612 kg |
| Height (to pin): | 127 inches 322 cm |
| Clearance, dumped bucket: | 99 inches 251 cm |
| Dump reach: | 31 inches 78 cm |
| Dump angle: | 40° |
| Clearance, level bucket: | 120 inches 304 cm |
| Rollback angle: | 11° |
| Breakout force (lift): | 4490 lbs 2036 kg |
| Lift to full height (at pin): | 2988 lbs 1355 kg |
| Bucket capacity: | 0.5 cu yd 0.4 cu m |
| 0.6 cu yd 0.5 cu m | |
| 0.8 cu yd 0.6 cu m | |
| 0.9 cu yd 0.7 cu m | |
| Bucket width: | 60 inches 152 cm |
| 72 inches 182 cm | |
| 84 inches 213 cm | |
| 96 inches 243 cm | |
John Deere 158 Loader | |
| For use on tractors with two-wheel drive. | |
| Loader weight: | 1771 lbs 803 kg |
| Height (to pin): | 156 inches 396 cm |
| Clearance, dumped bucket: | 127 inches 322 cm |
| Dump reach: | 28 inches 71 cm |
| Dump angle: | 37° |
| Clearance, level bucket: | 149 inches 378 cm |
| Rollback angle: | 14° |
| Breakout force (lift): | 4621 lbs 2096 kg |
| Lift to full height (at pin): | 3634 lbs 1648 kg |
| Bucket capacity: | 0.5 cu yd 0.4 cu m |
| 0.6 cu yd 0.5 cu m | |
| 0.8 cu yd 0.6 cu m | |
| 0.9 cu yd 0.7 cu m | |
| Bucket width: | 60 inches 152 cm |
| 72 inches 182 cm | |
| 84 inches 213 cm | |
| 96 inches 243 cm | |
John Deere 260 Loader | |
| For use on tractors with two-wheel drive. | |
| Loader weight: | 2178 lbs 987 kg |
| Height (to pin): | 154 inches 391 cm |
| Clearance, dumped bucket: | 126 inches 320 cm |
| Dump reach: | 40 inches 101 cm |
| Dump angle: | 46° |
| Clearance, level bucket: | 147 inches 373 cm |
| Rollback angle: | 42° |
| Breakout force (lift): | 4871 lbs 2209 kg |
| Lift to full height (at pin): | 3186 lbs 1445 kg |
| Bucket width: | 61 inches 154 cm |
| 73 inches 185 cm | |
| 85 inches 215 cm | |
| 97 inches 246 cm | |
John Deere 280 Loader | |
| For use on tractors with four-wheel drive. | |
| Loader weight: | 2795 lbs 1267 kg |
| Height (to pin): | 178 inches 452 cm |
| Clearance, dumped bucket: | 152 inches 386 cm |
| Dump reach: | 26 inches 66 cm |
| Dump angle: | 44° |
| Clearance, level bucket: | 173 inches 439 cm |
| Rollback angle: | 41° |
| Breakout force (lift): | 5126 lbs 2325 kg |
| Lift to full height (at pin): | 3718 lbs 1686 kg |
| Bucket width: | 85 inches 215 cm |
| 97 inches 246 cm | |
John Deere Official Website – Click Here
Also Read – John Deere vs Massey Ferguson
John Deere 4050 Review
The John Deere 4050 is a versatile utility tractor that was in production from 1986 to 1994. It’s propelled by a 4.5L turbocharged diesel engine with a robust 105 horsepower output.
The 4050 model offers various transmission options, including a 15-speed power shift and a manual transmission.
Noted for its reputation of reliability, durability, and user-friendliness, the 4050 is a preferred choice for a multitude of agricultural tasks such as haymaking, baling, and tillage. For a full review, please check this YouTube video.
Final Words
FAQs
This tractor was manufactured by John Deere in Waterloo, Iowa, USA, between 1983 and 1988.
The tractor is equipped with engines such as the John Deere 7.6L 6-cylinder diesel and the John Deere 5.9L 6-cylinder diesel.
The engine provides 130 horsepower (96.9 kW) for efficient performance.
Yes, there is a high-clearance variant known as the 4050 Hi-Crop.
The Torque Amplifier prevents free-wheeling when descending hills, enhancing control.
The weight of the tractor varies between 11,098 and 12,720 pounds, depending on specifications.
Reference literature published by John Deere during that era provides detailed insights into the tractor’s features and capabilities.
The production year can be determined by referring to the tractor’s serial number.
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.