John Deere 4044M Price, Specs, Review: Hello, friends hope you have seen all the models of John Deere tractors. Still, now If you are searching for the John Deere 4044M Compact Utility Tractor Price, Specification then read this article and to know the John Deere 4044M Compact Utility Tractor Price, Specs, Features, Attachments and more.
Also Check Here :
- John deere 7000 series tractor
- Kubota m4
- John deere 755 track loader
- Massey ferguson 1736 price
- Ford 1920 tractor manual
Contents
John Deere 4044M Compact Utility Tractor Price 2020
John Deere 4044M Compact Utility Tractor Price: $27,885.00
John Deere 4044M Compact Utility Tractor Features
 4R Tractor |  Powerful Yanmar engine |
 Dry-type air cleaner |  PowrReverser transmission lever |
 Forward/reverse clutches |  Helical-cut gears |
 Danfoss eHydro transmission |  Twin Touch foot controls |
John Deere 4044M Compact Utility Tractor Specification
| KEY SPECS | |
| Engine power | 31.7 kW 43.1 hp PS at 2600 rpm SAE J1995 rated power |
| Power take-off | PRT – 25 kW 33.6 hp eHST – 24.1 kW 32.3 hp Per SAE J1995 |
| Steering hydraulics | 23.5 L/min 6.2 gpm |
| Implement hydraulics | 42.3 L/min 11.2 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 1135 kg 2500 lb |
| Standard transmission | PowrReverser transmission (PRT) |
| Cruise control | Optional |
| Approximate shipping weight | Open operator station (OOS) – 1679 kg 3701 lb |
| Wheelbase | 185.5 cm 73 in. |
| ENGINE | |
| Family | EYDXL2.19NDA FYDXL2.19NDA GYDXL2.19NDA |
| Manufacturer | Yanmar |
| Engine model | 4TNV88C-MJT |
| Engine power | 31.7 kW 43.1 hp PS at 2600 rpm SAE J1995 rated power |
| Power take-off | PRT – 25 kWh 33.6 hp eHST – 24.1 kW 32.3 hp Per SAE J1995 |
| Rated engine speed | 2600 rpm |
| Type | Diesel |
| Injection pump type | High pressure |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 4 / 2.189 L 4 / 133.5 cu in. |
| Number of cylinders | Four |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 88×90 mm 3.46×3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Liquid |
| Air cleaner | Dual element |
| Engine torque at rated speed | 116 Nm 85.6 lb-ft |
| Fuel tank capacity | 56.9 L 15 U.S. gal. |
| ELECTRICAL | |
| Battery size | 770 CCA |
| Alternator (12-V) | 75 amp |
| Starter size | 2 kW 2.68 hp |
| FUEL SYSTEM | |
| Type | High pressure |
| TRANSMISSION | |
| Standard transmission | PowrReverser |
| Optional transmission | eHydro transmission (eHST) |
| Left-hand reverser | PRT only |
| Transmission gear ranges | 12F/12R PRT Infinitely-variable, 3 range |
| Final drive | Planetary |
| Brakes | Multi-plate wet disc |
| Steering | Hydrostatic |
| Clutch, wet/dry | Wet |
| Clutch disk diameter wet clutch | 129 mm 5.08 in. |
| Axle capacity | Front 1600 kg 3528 lb Rear 2400 kg 5292 lb |
| Creeper | No |
| Cruise control | Optional |
| Differential lock | Yes |
| HYDRAULICS | |
| Type | Open center |
| Pump rated output | Steering 23.5 L/min 6.2 gpm Implement 42.3 L/min 11.2 gpm 65.8 L/min 17.4 gpm |
| Pump type | Single gear |
| Draft control sensing | Position control |
| Remote control valves available | Up to six rear remotes |
| 3 POINT HITCH | |
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms | 1135 kg 2500 lb |
| POWER TAKE-OFF | |
| Standard | Independent 540 rpm at 2600 rpm |
| Control | Position |
| Clutch | Wet disc |
| FLUID CAPACITIES | |
| Crankcase with filter | 5.3 L 1.4 qt |
| Transmission and hydraulic | 47.3 L 12.5 gal. |
- Build your own John Deere 4044M Compact Utility Tractor: Click Here
- John Deere Dealer: Click Here
- Demo Request: Click Here
Also Find Here :
Final Words
Thank you guys for visiting our post, Hope you have got all the about John Deere 4044M Compact Utility Tractor Specification and more which you required but till yet if I miss any details as per your needs then you can post a comment in below comment box and we will post that details definitely cause we like to help you.
Leave a Reply