John Deere 40 HP tractor, Specs, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers, Problems, Attachments, Features & Pictures
The John Deere 40 is a two-wheel utility tractor made by John Deere in Dubuque, Iowa, USA from 1953 until 1955.
The John Deere 40 was produced with the following modifications: 40C – tracked tractor; 40H – high-crop; 40S – standard; 40T – tricycle; 40V – special; 40U – utility; 40W – two-row utility;
John Deere 40 model was the replacement for the John Deere M. The 40 variants included the John Deere 40S utility, standard, high-crop, 2-row utility, and a crawler model (the 40C).
The John Deere 40C and the utility tractor were used as industrial models, although there was no official John Deere designation for 40 industrial models.
This Utility Tractor featured a John Deere 1.6L 2-cyl gasoline and John Deere 1.6L 2-cyl all-fuel engine, 2900 to 4553 pounds weight, 4×2 2WD, and 4 forward and 1 reverse gear.
Now, let’s find out the Utility Tractor Price, Parts Specs, Reviews, Serial numbers & Images.
John Deere 40 Price
John Deere 40 Original Price: $1,500 (1954)
The prices of John Deere 40 for sale vary depending on the location, condition, and seller. Here are some websites where you can browse listings and check the prices:
- MarketBook.ca: Browse 29 listings of John Deere 40 for sale. The price of one listing is CAD $1,591.
- Fastline.com: Check the prices of 8 John Deere 40 for sale. The prices range from $1,750 to $43,900.
- TreeTrader.com: Browse 17 listings of John Deere 40 for sale. The prices are not listed, so you need to contact the seller for more information
John Deere 40 Serial Number
1953 | 60001 (Standard) |
1954 | 67359 (Standard) |
1955 | 69474 (Standard) |
1953 | 60001 (Tricycle) |
1954 | 72167 (Tricycle) |
1955 | 75531 (Tricycle) |
1953 | 60001 (Utility) |
1954 | 60202 (Utility) |
1955 | 63140 (Utility) |
1954 | 60001 (Hi-Crop) |
1955 | 60060 (Hi-Crop) |
John Deere 40 Specs
Here are the specifications for the John Deere 40 tractor:
History
Manufacturer: | John Deere |
Factory: | Dubuque, Iowa, USA |
Total built: | 18,000 |
Original price (USD): | $1,500 (1954) |
Engines overview |
|
John Deere 1.6L 2-cyl gasoline | |
John Deere 1.6L 2-cyl all-fuel |
Gasoline Engine
Engine Type: | John Deere gasoline 2-cylinder 4-valve liquid-cooled 100.5 ci [1.6 L] |
Bore/Stroke: | 4.00×4.00 inches [102 x 102 mm] |
Air cleaner: | oil bath |
Compression: | 6.5:1 |
Rated RPM: | 1850 |
Firing order: | 1-2 |
Starter volts: | 6 |
Oil capacity: | 5 qts [4.7 L] |
Coolant capacity: | 14 qts [13.2 L] |
All-fuel Engine
Engine Type: | John Deere all-fuel 2-cylinder 4-valve liquid-cooled 100.5 ci [1.6 L] |
Bore/Stroke: | 4.00×4.00 inches [102 x 102 mm] |
Air cleaner: | oil bath |
Compression: | 6.5:1 |
Rated RPM: | 1850 |
Firing order: | 1-2 |
Starter volts: | 6 |
Oil capacity: | 5 qts [4.7 L] |
Sparkplug gap: | 0.025 inches [0.635 mm] |
Point gap: | 0.022 inches [0.559 mm] |
Intake valve clearance: | 0.012 inches [0.305 mm] (cold) |
Exhaust valve clearance: | 0.012 inches [0.305 mm] (cold) |
Capacity
Fuel: | 10.5 gal [39.7 L] |
Aux. fuel: | 0.9 gal [3.4 L] |
Belt Pulley
Diameter: | 9.1 inches [23 cm] |
Width: | 6.375 inches [16 cm] |
RPM: | 1267 |
Speed: | 3006 ft/min [916.23 meters/min] |
John Deere 40 Power
Drawbar (claimed): | 16.77 hp [12.5 kW] |
Belt (claimed): | 21.13 hp [15.8 kW] |
Drawbar (tested): | 21.71 hp [16.2 kW] |
Belt (tested): | 24.25 hp [18.1 kW] |
Mechanical
Chassis: | 4×2 2WD |
Steering: | manual |
Cab: | Open operator station. |
John Deere 40 Transmission
Manufacturer: | John Deere |
Type: | gear |
Gears: | 4 forward and 1 reverse |
Clutch: | dry disc |
PTO
Rear PTO: | transmission |
Rear RPM: | 540 |
John Deere 40 Dimensions
Weight (operating): | 2,900 lbs [1315 kg] (40S) |
3,220 lbs [1460 kg] | |
Weight (ballasted): | 4,189 lbs [1900 kg] (40S) |
4,553 lbs [2065 kg] | |
Length: | 130.625 inches [331 cm] |
114.75 inches [291 cm] (the 40S) | |
Width: | 89.75 inches [227 cm] |
55.5 inches [140 cm] (the 40S) | |
Height: | 58.75 inches [149 cm] |
56 inches [142 cm] (the 40S) | |
Front tread: | 39.125 to 54 inches (the 40S) [99 to 137 cm] (the 40S) |
Rear tread: | 47.25 to 96 inches (40T) [120 to 243 cm] (40T) 38.75 to 54.128 inches (the 40S) [98 to 137 cm] (the 40S) |
Tires
Ag front: | 5.00-15 |
6.00×16 | |
Ag rear: | 9-24 (the 40S) |
10-24 (40S/U) | |
11-24 (40S/U) | |
11-26 (40U) | |
13-26 (40U) | |
9-34 (40W/T/V) | |
10-34 (40W/V/T) | |
10-38 (40H) | |
11-38 (40H) |
Battery
Number: | 1 |
Volts: | 6 |
John Deere 40 Attachments
Attachment overview | |
John Deere 30 loader | |
John Deere 40 loader |
John Deere 40 Loader
Height (to pin): | 114 inches [289 cm] |
Breakout force (lift): | 1800 lbs [816 kg] |
Lift to full height (at pin): | 800 lbs [362 kg] |
Bucket width: | 36 inches [91 cm] |
John Deere 30 Loader
Height (to pin): | 114 inches [289 cm] |
Breakout force (lift): | 1400 lbs [635 kg] |
Lift to full height (at pin): | 800 lbs [362 kg] |
Bucket width: | 34 inches [86 cm] |
Official Website John Deere – Click Here
Also, Check More Post Here:
- John Deere 6400 Specs
- John Deere 2040 Specs
- John Deere 1140 Specs
- Allis Chalmers 180 Specs
- John Deere 1130 Specs
The John Deere 40 Review
The John Deere 40 is a nice pick for farmers and people who own a lot of land and need a tractor they can always count on and use for lots of different jobs.
It’s strong enough to do lots of different things, and it’s got a bunch of things that make it good for lots of different uses.
But you should know that the John Deere 40 can cost quite a bit, and some folks have had issues with the electricity. For More Details Check Out The YouTube Video.
Final Words
The John Deere 40 is a 2WD utility tractor manufactured by John Deere in Dubuque, Iowa, USA from 1953 to 1955.
The John Deere 40 tractor has a horsepower of 16.8 HP (12.5 kW; ) at 1850 rpm
The max drawbar pull of the John Deere 40 tractor is 2,511 lbs or 1138 kg.
Load-depth control spring and threaded rod located on the rear of the tractor under the top link can come out while in use.
The shifter is a known problem with the 40T model.
All main internal engine components (main and rod bearings, rocker shafts, etc.) are supplied with unfiltered oil directly from the oil pump, any excess oil flows back to the oil pan unfiltered
John Deere model 40H (hi-crop). Variants of the model 40 are standard (S), utility (U), 2 row utility (W), tricycle (T), special (V) and crawler (C). The 40U and 40C were also available as industrial models.
The basic tractor serial number plate is located at the rear of the transmission case.
The serial numbers for the various styles of John Deere 40 tractors are located on the left side of the transmission housing.
The location of the serial number plate may vary depending on the model and year of the tractor
The length of the John Deere 40 tractor is 114.75 inches.
The height of the John Deere 40 tractor over the hood is 55.5 inches.