John Deere 2950 Price, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers, Attachments, History, Features & Pictures
The John Deere 2950 is a utility tractor available in either 2-wheel drive (2WD) or 4-wheel drive (4WD) options. This model belongs to the 2050 series and was produced by John Deere in Mannheim, Baden-Württemberg, Germany, from 1983 to 1988.
John Deere 2950 Utility Tractor is equipped with a John Deere diesel 6-cylinder liquid-cooled 359 ci [5.9 L] engine, which delivers 85 hp [63.4 kW] PTO claimed power at rated rpm 2500.
John Deere 2950 Tractor featured a John Deere 5.9L 6-cyl diesel engine, 4×2 2WD, 4,868 lbs [2208 kg] rear lift, Power steering, differential hydraulic wet disc brakes, and 16 forward and 8 reverse gears.
The John Deere 2950 Utility tractor attachments John Deere 148, John Deere 260, and John Deere 265 front-end loader.
Now, let’s find out the John Deere 2950 Utility Tractor Price, Parts Specs, Reviews, Serial Numbers and images.
John Deere 2950 Price
John Deere 2950 Original Price: $28,706 (1983 ROPS 2WD )/$40,456 (1983 Cab 4WD)
John Deere 2950 Specs
Production | |
Manufacturer | John Deere |
Utility tractor | |
Built in Mannheim, Baden-Württemberg, Germany | |
Model Year | 1983-1988 |
John Deere 2950 Engine
John Deere diesel 6-cylinder liquid-cooled 359 ci [5.9 L] | |
Bore/Stroke: | 4.19×4.33 inches [106 x 110 mm] |
Air cleaner: | two paper elements |
Compression: | 17.4:1 |
Rated RPM: | 2500 |
Starter volts: | 12 |
Coolant capacity: | 20 qts [18.9 L] |
capacity
Fuel: | 32.3 gal [122.3 L] |
3 Point Hitch
Rear Type: | II |
Control: | load and depth control |
Rear lift: | 4,868 lbs [2208 kg] |
John Deere 2950 Horsepower (Hp)
PTO (claimed): | 85 hp [63.4 kW] |
Drawbar (tested): | 72.12 hp [53.8 kW] |
PTO (tested): | 85.37 hp [63.7 kW] |
Mechanical
Chassis: | 4×2 2WD |
4×4 MFWD 4WD (optional) | |
Differential lock: | rear standard |
Steering: | power |
Brakes: | differential hydraulic wet disc |
Cab: | Two-post ROPS. Canopy available. Sound-Gard cab optional with available heat and air-conditioning. |
John Deere 2950 Transmission
Transmission: | John Deere Hi-Lo TSS |
Type: | partial power shift |
Gears: | 16 forward and 8 reverse |
Speed | Forward: 27.9 kmh (17.3 mph) Reverse: 12.5 (7.8 mph) |
Transmission | John Deere TSS Creeper |
Type | partially synchronized |
Gears | 12 forward and 8 reverse |
Speed | Forward: 27.9 kmh (17.3 mph) Reverse: 12.5 (7.8 mph) |
Hydraulics
Type: | closed center |
Rear valves: | 2 |
Pump flow: | 23 gpm [87.1 lpm] |
John Deere 2950 PTO
Rear PTO: | independent |
Rear RPM: | 540/1000 |
John Deere 2950 Dimensions
Weight (operating): | 10,100 lbs [4581 kg] (4WD cab) |
Weight (ballasted): | 11,045 lbs [5010 kg] |
2WD Wheelbase: | 100.4 inches [255 cm] |
4WD Wheelbase: | 101.6 inches [258 cm] |
Length: | 153.2 inches [389 cm] |
Height (steering wheel): | 73 inches [185 cm] |
Height (cab): | 108.3 inches [275 cm] |
2WD Clearance (front axle): | 25.9 inches [65 cm] |
4WD Clearance (front axle): | 18.9 inches [48 cm] |
2WD turn radius: | 14.8 feet [4.5 m] |
12.5 feet [3.8 m] (with brakes) | |
4WD turn radius: | 15.7 feet [4.8 m] |
John Deere 2950 Tires
Ag front: | 10.00-16:18.4-34 (2WD) |
13.6-24.8:18.4-34 (4WD) |
John Deere 2950 Electrical
Ground: | negative |
Charging system: | alternator |
Charging amps: | 55 |
John Deere 2950 Battery
Number: | 1 |
Volts: | 12 |
John Deere 2950 Serial Number
1983 | .433508 |
1984 | 505001 |
1985 | 532000 |
1986 | 562001 |
1987 | 587950 |
1988 | 592001 |
John Deere 2950 Attachments
When considering attachments for the John Deere 2950, options include the John Deere 148 loader, John Deere 260 loader, and John Deere 265 loader, which enhances the tractor’s capabilities.
John Deere 148 Loader | |
Loader type: | John Deere 148 |
For use on tractors with two-wheel drive. | |
Weight: | 1350 lbs [612 kg] |
Height (to pin): | 126 inches [320 cm] |
Clearance, dumped bucket: | 102 inches [259 cm] |
Dump reach: | 32 inches [81 cm] |
Dump angle: | 38 |
Clearance, level bucket: | 121 inches [307 cm] |
Rollback angle: | 11 |
Breakout force (lift): | 4700 lbs [2131 kg] |
Lift to full height (at pin): | 3100 lbs [1406 kg] |
Bucket capacity: | 0.5 cu yd [0.4 cu m] |
0.6 cu yd [0.5 cu m] | |
0.8 cu yd [0.6 cu m] | |
0.9 cu yd [0.7 cu m] | |
Bucket width: | 60 inches [152 cm] |
72 inches [182 cm] | |
84 inches [213 cm] | |
96 inches [243 cm] | |
John Deere 260 Loader | |
Loader type: | John Deere 260 |
Weight: | 2178 lbs [987 kg] |
Height (to pin): | 154 inches [391 cm] |
Clearance, dumped bucket: | 126 inches [320 cm] |
Dump reach: | 40 inches [101 cm] |
Dump angle: | 46 |
Clearance, level bucket: | 147 inches [373 cm] |
Rollback angle: | 42 |
Breakout force (lift): | 4871 lbs [2209 kg] |
Lift to full height (at pin): | 3186 lbs [1445 kg] |
Bucket width: | 61 inches [154 cm] |
73 inches [185 cm] | |
85 inches [215 cm] | |
97 inches [246 cm] | |
265 Loader | |
Loader type: | John Deere 265 |
Weight: | 2619 lbs [1187 kg] |
Height (to pin): | 157 inches [398 cm] |
Clearance, dumped bucket: | 123 inches [312 cm] |
Dump reach: | 25.6 inches [65 cm] |
Clearance, level bucket: | 150 inches [381 cm] |
Rollback angle: | 43 |
Breakout force (lift): | 5730 lbs [2599 kg] |
Lift to full height (at pin): | 3920 lbs [1778 kg] |
Bucket width: | 61 inches [154 cm] |
73 inches [185 cm] | |
85 inches [215 cm] | |
97 inches [246 cm] |
John Deere 2950 Problems And Their Solutions
Here are some common problems that can occur with the John Deere 2950 tractor and their potential solutions:
1. Hydraulic Pump Failure:
- Issue: Hydraulic pump failure leading to loss of hydraulic power and impaired tractor functions.
- Solution: Consult a qualified technician to repair or replace the hydraulic pump as needed.
2. Low Hydraulic Oil:
- Issue: Insufficient hydraulic oil causing steering problems and engine starting difficulties.
- Solution: Check and replenish hydraulic oil level; inspect for leaks that might be causing oil loss.
3. Slow Rockshaft and Loss of Pressure/Flow:
- Issue: Slow rock shaft movement and reduced pressure/flow in auxiliary hydraulics.
- Solution: Clean or replace the control valve and hydraulic filter to restore proper functioning.
4. Gradual Loss of Hydraulic Power:
- Issue: Gradual decline in hydraulic power, possibly due to worn pump or internal leaks.
- Solution: Have the hydraulic system inspected and repaired by a professional mechanic.
5. High-Pressure Hydraulic Leaks:
- Issue: High-pressure hydraulic leaks occur after extended usage.
- Solution: Examine the hydraulic system for leaks; replace worn seals or damaged lines as needed.
6. No High Range:
- Issue: High range not operating as expected.
- Solution: Seek assistance from a skilled technician to diagnose and address transmission or clutch-related issues.
Also, Check Here :
- Kord 1510 review
- Massey Ferguson 1020 oil capacity
- Kubota b1600 serial number
- Cub Cadet 127 specs
- John deere 4640 specs
- John deere 4120 specs
John Deere 2950 Review
Overall, the John Deere 2950 is a decent tractor for light to medium-duty work, but may not be suitable for heavy-duty tasks.
The diesel fuel injection pump has been a common issue among users, but the tractor has some good features such as easy cold weather start-up and a good hydraulic system. For More Details Check Out The YouTube Video.
Final Words
FAQs
A John Deere 2950 utility tractor is a model of a tractor produced by John Deere in the 1980s. It is a 6-cylinder tractor with a range of features, including a loader and a cab.
The John Deere 2950 utility tractor has a 6-cylinder engine with a rated PTO horsepower of 85.
The weight of a John Deere 2950 utility tractor varies depending on the specific configuration, but it typically weighs around 10,100 pounds
The oil capacity of a John Deere 2950 utility tractor is 14 quarts.
The lift capacity of a John Deere 2950 utility tractor depends on the specific configuration and attachments, but it typically has a lift capacity of around 4,868 pounds
prices for used John Deere 2950 tractors range from around $23,500 to $25,000. The value of a John Deere 2950 utility tractor depends on a range of factors, including its age, condition, and any additional features or attachments.
Common issues with John Deere 2950 utility tractors can include problems with the transmission, hydraulic system, and engine.
The oil in a John Deere 2950 utility tractor should be changed after the first 100 hours of use, and then every 500 hours thereafter or annually, whichever occurs first.
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.