John Deere 2940 Price, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers, Attachments, History, Features & Pictures
The John Deere 2940 is a versatile utility tractor that offers both 2WD and 4WD options. It belongs to the 2040 series, along with the 2640 model. John Deere manufactured it in Mannheim, Baden-Württemberg, Germany, from 1980 to 1982.
John Deere 2940 Utility Tractor is equipped with a John Deere diesel 6-cylinder liquid-cooled 359 ci [5.9 L] engine, which delivers 68 hp [50.7 kW] Drawbar (claimed) power at rated rpm 2500.
The John Deere 2940 Utility Tractor featured a John Deere 5.9L 6-cyl diesel engine, 4×2 2WD, power steering, 2400 lbs [1088 kg] Rear lift (at 24″/610mm), 16 forward and 8 reverse gears, and 9435 to 10650 pounds Weight.
Now, let’s find out the John Deere 2940 Tractor Price, Parts Specs, Reviews, Weight, Attachments, Serial Numbers & Images.
John Deere 2940 Price
John Deere 2940 Original Price: $25,500 (1982)
The John Deere 2940 tractor for Sale at varying prices, depending on the seller and the tractor’s condition. Several reputable tractor traders offer this model:
TractorHouse.com has listings of John Deere 2940 tractors for sale, priced between $17,500 and $19,500.
Machinery Pete offers used John Deere 2940 tractors for sale, with prices ranging from $9,500 to $19,500.
Fastline provides listings of John Deere 2940 tractors for sale, with prices ranging from $7,500 to $19,500.
MarketBook.ca has listings of John Deere 2940 tractors for sale, priced between $19,500 and $25,000.
John Deere 2940 Specs
|Built in Mannheim, Baden-Württemberg, Germany|
John Deere 2940 Engine
|engine||John Deere diesel 6-cylinder liquid-cooled 359 ci [5.9 L]|
|Bore/Stroke:||4.19×4.33 inches [106 x 110 mm]|
|Coolant capacity:||20 qts [18.9 L]|
John Deere 2940 Power
|Drawbar (claimed):||68 hp [50.7 kW]|
|PTO (claimed):||82 hp [61.1 kW]|
|Drawbar (tested):||64.18 hp [47.9 kW]|
|PTO (tested):||81.17 hp [60.5 kW]|
3 Point Hitch
|Control:||position control and lower-link draft sensing|
|Rear lift (at 24″/610mm):||2400 lbs [1088 kg]|
|4×4 MFWD 4WD|
|Differential lock:||mechanical rear|
|Brakes:||differential hydraulic wet disc|
|Cab:||Open operator station. Sound-Gard Cab is optional.|
John Deere 2940 Transmission
|Transmission:||John Deere TSS High-Low|
|Type:||partial power shift|
|Gears:||16 forward and 8 reverse|
|Pressure:||2250 psi [155.1 bar]|
|Pump flow:||23 GPM [87.1 lpm]|
John Deere 2940 Dimensions & weight
|Weight (operating):||9435 lbs [4279 kg] (4WD ROPS)|
|Weight (ballasted):||10650 lbs [4830 kg]|
|Wheelbase:||101.6 inches [258 cm]|
|Length:||164.9 inches [418 cm]|
|Width:||90.3 inches [229 cm]|
|Height (hood):||67.1 inches [170 cm]|
|Height (exhaust):||113 inches [287 cm]|
|Clearance (front axle):||25.6 inches [65 cm]|
|Front tread:||57 to 82.4 inches
[144 to 209 cm] 63 to 94 inches (wide front)
[160 to 238 cm] (wide front)
|Rear tread:||69 to 91 inches
[175 to 231 cm]
John Deere 2940 Tires
|2WD Standard tires (ag):||Front: 10.00-16. Rear: 18.4-34|
|4WD Standard tires (ag):||Front: 12.4-28. Rear: 16.9-38|
|4WD Optional tires (ag):||Front: 13.6-24. Rear: 18.4-34|
John Deere 2940 Battery
John Deere 2940 Serial Number
The serial numbers for the John Deere 2940 can be found on a plate located on the front-right side of the tractor’s frame, just above the front axle.
2940 John Deere Problems And Solution
Usual Issues with John Deere 2940 and Solutions:
Hydraulic System-Related Problems:
Overheated or low fluid pressure: Use the right hydraulic oil, check for leaks, adjust the spool valve, and repair broken cylinders or pumps.
Hydraulic issues: If the tractor experiences problems with its hydraulics, it might be due to a malfunctioning hydraulic pump. Inspect the hydraulic pump and replace it if needed.
Slow three-point hitch: If the front loader operates fine, but the three-point hitch is slow to raise and lower, the issue could be an improperly adjusted hitch valve. Check the hitch valve and make necessary adjustments.
Difficulty starting, engine stalling, overheating, low power, or unusual noises: Check and clean the fuel filter, bleed air from the fuel system, adjust injection timing, inspect the radiator, and ensure sufficient engine oil.
Problems with the 3-Point Hitch:
Battery not charging, starter not cranking, or slow starter: Tighten/clean connections, replace battery or starter, and ensure proper wiring.
Excessive play, pulling to the side, or hard steering: Replace worn parts, check the steering pump, examine linkage, bleed air from the system, and maintain sufficient fluid level.
Water Pump Problems
Faulty water pump: If the water pump is faulty, it could cause the tractor to overheat. Check the water pump and replace it if necessary
Noisy transmission, difficult gear shifting, oil leaks, or low pressure: Inspect and repair/replace gears, clutch, shaft splines, and bearings. Maintain proper oil level and fix broken seals or gaskets.
Always consider consulting a professional technician for complex issues.
Official website: John Deere
- John deere 3032e review
- Ford lgt 165 specs
- Mahindra tractor specs
- Kubota b7300 review
- New holland 1920 review
- John deere 8760 specs
John Deere 2940 Review
The John Deere 6420 is a strong and dependable tractor that’s great for all kinds of farming work. It’s got a comfy seat, you can see really well from it, and it’s awesome at lifting stuff. But it can be pricey to buy and take care of, and it could use less fuel. For a full review, please check this YouTube video.
John Deere 2940 – FAQs
The John Deere 2940 tractor is equipped with a 6-cylinder engine that provides approximately 68 horsepower.
Yes, the John Deere 2940 is powered by a diesel engine, which offers fuel efficiency and durability.
The John Deere 2940 typically comes with a synchronized shuttle transmission, which allows for smooth and easy gear shifting.
Yes, the John Deere 2940 is compatible with front-end loaders, which can be attached to handle various material handling tasks.
The hydraulic system on the John Deere 2940 has a lift capacity of approximately 2,400 to 3,000 pounds.
The weight of the John Deere 2940 tractor is around 9435 to 10650 pounds, depending on the specific configuration and optional equipment.
Yes, the John Deere 2940 is designed for a wide range of agricultural tasks, including plowing, planting, harvesting, and more.
Yes, the John Deere 2940 is equipped with a 3-point hitch system, allowing for the attachment of various implements such as plows, mowers, and tillers.
The fuel capacity of the John Deere 2940 is typically around 24 to 33.25 gallons.
Yes, the John Deere 2940 comes with power steering, which makes it easier to maneuver the tractor, especially in tight spaces.
Yes, the John Deere 2940 is suitable for haymaking tasks such as baling, raking, and tedding when equipped with the appropriate attachments.
The recommended maintenance intervals for the John Deere 2940 include regular oil and filter changes, fluid checks, tire inspections, and overall equipment inspections according to the manufacturer’s guidelines.
Yes, the John Deere 2940 can be fitted with a cab enclosure, providing operator comfort and protection from weather conditions.
The top speed of the John Deere 2940 is typically around 16.8 to 20 miles per hour, depending on the specific configuration.