John Deere 2630 Specs, Price, Weight, Reviews 2024

John Deere 2630 Specs, Price, Weight, Reviews 2024

John Deere 2630 Price, Reviews, Specs, Engine Oil Capacity, Weight, Serial Numbers,  Attachments, History, Features & Pictures

The John Deere 2630 is a 2WD utility tractor part of the Generation II series. It was produced by John Deere in Dubuque, Iowa, USA, during the years 1974 to 1975.

John Deere 2630 Utility Tractor was equipped with a John Deere diesel 4-cylinder liquid-cooled 276 ci [4.5 L] engine, which delivers 57.88 hp [43.2 kW] Drawbar (tested) power at rated rpm 2500.

John Deere 2630 Utility Tractor had a John Deere 4.5L 4-cyl diesel engine, 4×2 2WD, differential hydraulic wet disc brakes, 5,800 lbs [2630 kg] weight, and 16 forward and 8 reverse gears.

John Deere 2630 Utility tractor’s Original price was $11,000 USD (1975).

Now, let’s find out the John Deere 2630 Utility Tractor Price, Parts Specs, Reviews, Serial Numbers & Images.

John Deere 2630 Price 

John Deere 2630 Specs, Price, Weight, Reviews

John Deere 2630 Original Price: $11,000 (1975)

The Value of a John Deere 2630 tractor available for purchase can fluctuate based on factors such as the seller, location, and the equipment’s condition. Here are a few price listings found on various websites:

  • Prices range from USD $9,500 to USD $12,100.
  • Machinery Pete: Prices are listed at USD $9,900 and USD $11,900.
  • Fastline: Prices vary between USD $10,000, USD $10,500, and USD $12,100.

John Deere 2630 Specs

Manufacturer:John Deere
Type:Utility tractor
Factory:Dubuque, Iowa, USA
Model Year1974-1975

John Deere 2630 Power

Drawbar (tested):57.88 hp [43.2 kW]
PTO (tested):70.37 hp [52.5 kW]

John Deere 2630 Engine:

EngineJohn Deere diesel 4-cylinder liquid-cooled 276 ci [4.5 L]
Bore/Stroke:4.19×5.00 inches [106 x 127 mm]
Rated RPM:2500
Firing order:1-3-4-2
Starter volts:12
Coolant capacity:12 qts [11.4 L]


Fuel:19.5 gal [73.8 L]
Hydraulic system:10 gal [37.9 L]


Chassis:4×2 2WD
Steering:mechanical with power assist
Brakes:differential hydraulic wet disc
Cab:Open operator station.

John Deere 2630 Transmission

Type:partial power shift
Gears:16 forward and 8 reverse
Clutch:dry disc
Transmission:Direction Reverser
Type:power shuttle
Gears:8 forward and reverse
Four gears (1-4) in two ranges (I-II) with dashboard shuttle lever.


Type:closed center
Capacity:10 gal [37.9 L]
Pressure:2250 psi [155.1 bar]
Pump flow:6 gpm [22.7 lpm] (transmission)
 8.5 gpm [32.2 lpm] (remotes)
 18.5 gpm [70.0 lpm] (optional)
Total flow:14.5 gpm [54.9 lpm]
 24.5 gpm [92.7 lpm] *


Rear PTO:independent
Rear RPM:540
 540/1000 (optional)
Front PTO:optional
Front RPM:1000

John Deere 2630 Dimensions

Weight (operating):5,800 lbs [2630 kg]
Weight (ballasted):8,430 lbs [3823 kg]
Wheelbase:85.75 inches [217 cm]

John Deere 2630 Tires

Ag front:6.00-16
Ag rear:16.9-28



John Deere 2630 Battery


John Deere 2630 Serial Number


John Deere 2630 Problems

The John Deere 2630 tractor, while generally reliable, can encounter common issues like any other equipment. Here are some of these issues and their solutions:

  1. Faulty Wiring System: The tractor’s wiring system may develop faults, leading to electrical problems. The solution involves inspecting the wiring for loose connections or damaged wires and replacing them as necessary.
  2. Ignition Problems: Issues in the ignition system can result in engine starting failures. To address this, check for loose connections or damaged ignition components and replace them accordingly.
  3. Fuel Depletion: Running out of fuel can cause the engine to stall. Refill the fuel tank and bleed the system to remove air pockets for a solution.
  4. Hydraulic Pressure Issues: Low hydraulic pressure can impair equipment performance. Inspect the hydraulic system for leaks or damaged parts and replace them as required.
  5. Throttle Linkage Damage: A broken throttle linkage may cause the engine to run at a constant speed. Examine the linkage for damage and replace if necessary.
  6. Engine Failures: Engine failure, a common problem, can result from poor maintenance, overheating, or worn-out components. Perform routine engine maintenance, inspect the cooling system, and replace worn parts.
  7. Braking System Damage: A damaged braking system can lead to poor stopping performance. Check for leaks or damaged brake components and replace them as needed.
  8. Display Issues: Owners have reported display problems, including flickering or complete shutdown. Solutions include updating the software or replacing the display unit.
  9. Splitting Troubles: Some users have experienced issues with the tractor splitting. Inspect the tractor for damage and perform necessary repairs.

Addressing these common problems can help maintain the reliability and performance of the John Deere 2630 tractor.

Also, Check Here :

John Deere 2630 Review

The John Deere 2630, a four-wheel drive tractor manufactured from 1972 to 1979, is driven by a 4-cylinder, 2.3-litre diesel engine delivering 57 horsepower at the drawbar.

This tractor is well-regarded for its reliability and versatility, capable of handling an array of tasks, including mowing, haying, tillage, and loader work. For a full review, please check this YouTube video.

Final Words


What is the John Deere 2630?

 The John Deere 2630 is a utility tractor produced by John Deere from 1974 to 1975 as part of the Generation II Series.

What is the engine size of the John Deere 2630?

The John Deere 2630 is equipped with a 4.5L 4-cylinder diesel engine with a displacement of 276 cubic inches.

What is the horsepower of the John Deere 2630?

The John Deere 2630 produces 57.88 horsepower at the drawbar and 70.37 horsepower at the PTO.

What is the weight of the John Deere 2630?

The John Deere 2630 has a weight of 5,800 lbs.

What is the pressure of the hydraulic system of the John Deere 2630?

The hydraulic system of the John Deere 2630 has a pressure of 2250 psi.

What is the pump flow of the hydraulic system of the John Deere 2630?

The hydraulic system of the John Deere 2630 has a pump flow of 6 gpm for the transmission, 8.5 gpm for the remotes, and 18.5 gpm for the optional system.

How do I locate the serial number on a John Deere 2630 tractor?

The serial number plate is typically located on the right side of the frame, just above the front axle.

Are there specific attachments available for the John Deere 2630 tractor?

Yes, attachments such as front-end loaders and backhoes can be added to enhance the versatility of the John Deere 2630 tractor for various tasks.