John Deere 1050 Tractor Specs, Price, Review, Serial Numbers, Weight, History & Pictures
John Deere 1050 is a 2WD or 4WD compact utility tractor from the John Deere 50 Compact series (950 – 1050). the John Deere 1050 tractor was built by Yanmar for John Deere from 1980 to 1989.
The John Deere 1050 tractor is fitted with a 1.7 L three-cylinder diesel engine and sliding gear transmission with eight forward and two reverse gears.
John Deere 1050 compact utility tractor is fitted with a Yanmar 3T90TJ engine. It is a 1.7 L, 1,721 cm2, (105.0 cu·in) three-cylinder natural aspirated diesel engine with a 3.54 in (90.0 mm) cylinder bore and 3.54 in (90.0 mm) piston stroke.
The compression ratio rating is 20.4:1. This engine produced 27.6 kW; 37.0 HP (37.5 PS) at a rated rpm of 2,400 of maximum output power. John Deere 1050 weight is 2933 to 3400 pounds, and its engine oil capacity is 7 qts
(6.6 L).
As for attachments, the John Deere 1050 can be used with various implements, including backhoes, loaders, mowers, plows, cultivators, and blades.
Now, let’s find out the John Deere 1050 Tractor’s Price, Specs, Review, Attachments, Weight, Features & Images, and more. I hope it will be useful to you.
John Deere 1050 Tractor Price
John Deere 1050 tractor Original Price: $15,000 (1989 )
Here is the information on the price of the John Deere 1050 tractor for sale:
- TreeTrader.com has listings for John Deere 1050 Tractors for sale, and a 1994 John Deere 1050 with less than 40 HP is listed for sale at USD $6,500.
- Nicholson Auction Co. is selling a John Deere 1050, but the price is not listed.
- MarketBook.ca has listings for John Deere 1050 for sale, and a used 1986 John Deere 1050 is offered at CAD $10,027.
- EquipmentFacts.com has auction results for John Deere 1050, and the sold price ranges from USD 1,600.00 to USD 4,400.00
John Deere 1050 Tractor Review Video
The John Deere 1050 is a great tractor that can be used for backhoe trenches, pulling logs, and excavating. The reviewer did mention that they had to replace two clutches on the tractor.
John Deere 1050 Tractor Specs
JOHN DEERE 1050 ENGINE:
| Type | Yanmar turbocharged diesel 3-cylinder liquid-cooled 105 ci [1.7 L] |
| Bore/Stroke: | 3.54×3.54 inches [90 x 90 mm] |
| Power (gross): | 37 hp [27.6 kW] |
| Air cleaner: | dual paper elements |
| Compression: | 20.4:1 |
| Rated RPM: | 2400 |
| Starter volts: | 12 |
| Oil capacity: | 7 qts [6.6 L] |
| Coolant capacity: | 6.5 qts [6.2 L] |
JOHN DEERE 1050 POWER:
| Engine (gross): | 37 hp [27.6 kW] |
| Drawbar (claimed): | 28 hp [20.9 kW] |
| PTO (claimed): | 33 hp [24.6 kW] |
| Drawbar (tested): | 27.25 hp [20.3 kW] |
| PTO (tested): | 33.41 hp [24.9 kW] |
JOHN DEERE 1050 TRANSMISSION:
| Type: | sliding gear |
| Gears: | 8 forward and 2 reverse |
| Clutch: | 255mm mechanical dry disc |
| Oil capacity: | 28.5 qts [27.0 L] |
JOHN DEERE 1050 TIRES:
| Ag front: | 6.00-16 |
| Ag rear: | 13.6-28 |
CAPACITY
| Fuel: | 11 gal [41.6 L] |
| Hydraulic system: | 6.875 gal [26.0 L] |
PTO
| Rear PTO: | live* |
| Rear RPM: | 540 |
| Engine RPM: | 540@2260 |
HYDRAULICS
| Type: | open center |
| Capacity: | 6.875 gal [26.0 L] |
| Pressure: | 2030 psi [140.0 bar] |
| Pump flow: | 7.5 GPM [28.4 lpm] |
MECHANICAL
| Chassis: | 4×2 2WD |
| 4×4 MFWD 4WD | |
| Steering: | manual |
| Brakes: | differential mechanical internal expanding shoe |
| Cab: | Two-post ROPS. |
JOHN DEERE 1050 DIMENSIONS
| Weight (shipping): | 2933 lbs [1330 kg] (2WD) |
| 3142 lbs [1425 kg] (4WD) | |
| Weight (operating): | 3400 lbs [1542 kg] (4WD) |
| Weight (ballasted): | 4140 lbs [1877 kg] |
| Wheelbase: | 68.9 inches [175 cm] |
| Length: | 122 inches [309 cm] |
| Width: | 65 inches [165 cm] |
| 2WD Height (hood): | 55.1 inches [139 cm] |
| 4WD Height (hood): | 54 inches [137 cm] |
| Front tread: | 49 inches [124 cm] |
| Rear tread: | 51 to 75 inches [129 to 190 cm] |
John Deere 1050 Tractor Serial Numbers
| 1980: | 1000 |
| 1981: | 5280 |
| 1982: | 6572 |
| 1983: | 9001 |
| 1984: | 11006 |
| 1985: | 14001 |
| 1986: | 17001 |
| 1987: | 19501 |
| 1988: | 21479 |
| Final: | 23734 |
The serial number plate is located on the back of the John Deere 1050, just below the PTO shaft.
John Deere 1050 Tractor Attachments
John Deere 1050 Loader: |
|
| Loader type: | John Deere 80 |
| Height (to pin): | 93.5 inches [237 cm] |
| Clearance, dumped bucket: | 75.2 inches [191 cm] |
| Dump reach: | 23.8 inches [60 cm] |
| Dump angle: | 40 |
| Reach at ground: | 53.2 inches [135 cm] |
| Rollback at ground: | 21 |
| Breakout force (lift): | 1,800 lbs [816 kg] |
| Breakout force (bucket): | 2,040 lbs [925 kg] |
| Lift to full height (at pin): | 910 lbs [412 kg] |
| Lift to 1.5m (at pin): | 1,125 lbs [510 kg] |
| Bucket width: | 53 inches [134 cm] |
| Raise time to height: | 4.1 s |
| Bucket dump time: | 4.5 s |
| Lowering time: | 2.5 s |
| Rollback time: | 2.8 s |
John Deere 1050 Backhoe: |
|
| Backhoe type: | John Deere 8A |
| Weight: | 950 lbs [430 kg] |
| 2-Foot flat digging depth: | 102 inches [259 cm] |
| Reach from pivot: | 133 inches [337 cm] |
| Loading height: | 82 inches [208 cm] |
| Bucket force: | 3,200 lbs [1451 kg] |
72″ Mower deck: |
|
| Type: | mid-mount John Deere 172 |
| 3-blade | |
| Cutting width: | 72 inches [182 cm] |
Blade: |
|
| Type: | front-mount John Deere 423 |
| Width: | 72 inches [182 cm] |
John Deere 1050 Problems
The John Deere 1050 tractor may encounter various issues, including engine troubles, electrical problems, and hydraulic leaks.
Engine troubleshooting:
- If the fuel filter element is dirty, clean or replace it.
- If the engine stalls during operation, inspect the fuel system, including the fuel filter, lines, and pump. Also, check the air filter and spark plugs.
- To address overheating, check the coolant level, radiator, water pump, and thermostat.
- If the tractor has difficulty starting, inspect the battery, starter, alternator, fuel system, and glow plugs.
- For loss of power, check the air and fuel filters, fuel system, exhaust system, and turbocharger.
- If there are strange noises, inspect the engine oil level, oil pressure, belts, pulleys, and bearings.
Regarding electrical problems:
- If the battery is dead, check battery connections, alternator, and battery condition.
- For blown fuses, inspect the electrical system for shorts or damaged wires, and examine the components connected to the fuse.
- For starter problems, check the starter motor, solenoid, battery, and electrical connections.
For hydraulic problems:
- If there are hydraulic leaks, inspect the hydraulic hoses, fittings, seals, pump, and control valves.
- For a slow or weak hydraulic system, check the hydraulic fluid level and condition, as well as the pump and control valves.
- If the hydraulic system is noisy, check the hydraulic fluid level and condition, as well as the pump and control valves.
Note that some issues may require professional assistance to fix. If unsure, it is best to consult a qualified technician.
Also Find Here :
Final Words
That’s all about the John Deere 1050 Tractor Price, Specification, Review, Attachments and Features. But If you have any problem regarding this post, then please comment in the below comment box. I will try to solve your problem as soon as possible. Thanks.
FAQ
The John Deere 1050 is a compact utility tractor produced by John Deere, a leading manufacturer of agricultural machinery. It is designed for various tasks on small to medium-sized farms and properties.
The John Deere 1050 tractor has a rated engine horsepower of 37 horsepower (27.6 kW) and a power take-off (PTO) horsepower of approximately 33 horsepower (24.6 kW). This power output provides sufficient performance for a range of applications.
John Deere 1050 features a three-cylinder, liquid-cooled diesel engine. It typically has a displacement of around 1.7 liters and offers reliable power and fuel efficiency for various agricultural tasks.
The John Deere 1050 tractor typically features a gear transmission with 8 forward gears and 2 reverse gears. This manual transmission allows for precise control of speed and power delivery.
The John Deere 1050 tractor comes with features designed to enhance its functionality, including four-wheel drive, power steering, a three-point hitch, a rear PTO, and the ability to attach a variety of implements such as mowers, tillers, and loaders.
The operating weight of the John Deere 1050 tractor is approximately 3400 lbs (1542 kg) without any attachments or implements. This weight may vary slightly depending on the specific configuration and optional equipment.
The John Deere 1050 tractor typically has a fuel capacity of around 11 gallons (41.6 liters). This allows for extended periods of operation without frequent refueling.
The John Deere 1050 is equipped with a basic hydraulic system that provides hydraulic power for certain attachments and implements. It may have a limited number of hydraulic outlets for simple hydraulic functions.
John Deere 1050’s maximum forward speed is approximately 12 miles per hour (19 kilometers per hour). Meanwhile, its reverse speed varies between 5 miles per hour (8 kilometers per hour).
Yes, the John Deere 1050 can be used with a front-end loader attachment. It is designed to handle loader work and can be equipped with a compatible John Deere loader for tasks such as material handling and lifting.
Yes, the John Deere 1050 is suitable for residential use, especially for small-scale farming, landscaping, and property maintenance. Its compact size and versatility make it convenient for working in tight spaces.
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.