Ford 2600 Tractor Price, Specs, Review, Attachments 2021

Ford 2600 Price, Reviews, Specs, Engine Oil Capacity, Attachments, Features & Pictures

Ford made the 2600 Utility tractor with a gasoline and diesel engine. Both engines have a 7-quart oil capacity.

Both engines have three cylinders and are rated at 2000 rpm. The transmission system has 8 forward and 2 reverse gears.

Serial numbers for 2600 are located on the right side of the ford 2600 tractor behind the starter. Ford 2600 Utility tractor has 2WD, power-assist steering with differential mechanical expanding shoe brakes

Now, let’s find out the Ford 2600 Tractor HP, Price, Specs, Review, Features & Images, and more. I hope it will be useful to you.

Also Check  Here :

Ford 2600 Tractor Price

Ford 2600 Tractor Price, Specs, Review, Attachments

Original Price: $6,436 (1981)

Ford 2600 Tractor Review Video

Ford 2600 Tractor Serial Numbers

  • 1975: C450700
  • 1976: C490300
  • 1977: C527300
  • 1978: C560500
  • 1979: C595800
  • 1980: C635700
  • 1981: C660700
  • 1982: C682000 

Ford 2600 Specs

Ford 2600 GASOLINE ENGINE

ENGINE Ford gasoline 3-cylinder liquid-cooled 158 ci [2.6 L]
Bore/Stroke: 4.20×3.80 inches [107 x 97 mm]
Power (gross): 35.5 hp [26.5 kW]
Air cleaner: dry
Compression: 7.75:1
Rated RPM: 2000
Torque: 100.5 lb-ft [136.3 Nm]
Torque RPM: 1350
Firing order: 1-2-3
Starter: electric
Starter volts: 12
Oil capacity: 7 qts [6.6 L]
Coolant capacity: 11 qts [10.4 L]

Ford 2600 DIESEL ENGINE

engine Ford diesel 3-cylinder liquid-cooled 158 ci [2.6 L]
Bore/Stroke: 4.20×3.80 inches [107 x 97 mm]
Power (gross): 36.5 hp [27.2 kW]
Air cleaner: oil bath
Pre-heating: ether injection*
coolant heater*
Compression: 17.3:1
Rated RPM: 2000
Torque: 101 lb-ft [137.0 Nm]
Torque RPM: 1400
Firing order: 1-2-3
Starter: electric
Starter volts: 12
Oil capacity: 7 qts [6.6 L]
Coolant capacity: 11 qts [10.4 L]

Ford 2600 TRANSMISSION

Transmission:
Type: gear
Gears: 6 forward and 2 reverse
Oil capacity: 13.8 qts [13.1 L]
Transmission:
Transmission: Dual-Range
Gears: 8 forward and 2 reverse
Clutch: dry disc
Oil capacity: 13.8 qts [13.1 L]
Speeds: With 12.4-28 rear tires.

Ford 2600 CAPACITY

Fuel: 13 gal [49.2 L]
Hydraulic system: 6.15 gal [23.3 L]

Ford 2600 3 point hitch HITCH

Rear Type: I
Control: top-link draft sensing
Rear lift: 1975 lbs [895 kg]

Ford 2600 HYDRAULICS

Capacity: 6.15 gal [23.3 L]
Pressure: 2100 psi [144.8 bar]
Pump flow: 8.5 gpm [32.2 lpm]

Ford 2600 PTO

Rear PTO: transmission
live*
Rear RPM: 540 (1.375)

Ford 2600 POWER

Engine (gross): 36.5 hp [27.2 kW]
Engine (net): 34.3 hp [25.6 kW]
PTO (claimed): 30 hp [22.4 kW]
Drawbar (tested): 28.76 hp [21.4 kW]
PTO (tested): 34.18 hp [25.5 kW]

Ford 2600 MECHANICAL

Chassis: 4×2 2WD
Differential lock: mechanical rear*
Steering: manual
Steering: power*
Brakes: differential mechanical expanding shoe
Cab: Open operator station. Two-post ROPS optional with available canopy.

Ford 2600 DIMENSIONS

Weight (shipping): 3617 lbs [1640 kg]
Wheelbase: 75.8 inches [192 cm]
Length: 126.5 inches [321 cm]
Width: 52 inches [132 cm]
Height (hood): 52.5 inches [133 cm]
Clearance (front axle): 21.5 inches [54 cm]
Clearance (rear axle): 12.6 inches [32 cm]
Front tread: 52 to 80 inches
[132 to 203 cm]
Rear tread: 52 to 76 inches
[132 to 193 cm]
52 to 80 inches*
[132 to 203 cm] ((Power-adjust wheels))

Ford 2600 BATTERY

Number: 1
Volts: 12
Gas Amp-hours: 77
Diesel Amp-hours: 128

Ford 2600 ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 32
51*

Ford 2600 TYRES

Ag front: 5.50-16
Ag rear: 12.4-28

Ford 2600 Attachments

Loader:
Loader type: Ford 730
Weight: 985 lbs [446 kg]
Clearance, dumped bucket: 103 inches [261 cm]
Dump reach: 19.5 inches [49 cm]
Dump angle: 42
Reach at ground: 62.8 inches [159 cm]
Rollback angle: 21
Breakout force (lift): 3550 lbs [1610 kg]
Lift to full height (at pin): 2040 lbs [925 kg]
Bucket width: 61.5 inches [156 cm]
Raise time to height: 3.6 s
Lowering time: 1.8 s
Loader:
Loader type: Ford 772A
Weight: 930 lbs [421 kg]
Height (to pin): 124 inches [314 cm]
Clearance, dumped bucket: 98.5 inches [250 cm]
Dump reach: 32.3 inches [82 cm]
Dump angle: 33
Reach at ground: 75 inches [190 cm]
Rollback angle: 9
Breakout force (lift): 3800 lbs [1723 kg]
Lift to full height (at pin): 2460 lbs [1115 kg]
Bucket width: 48 inches [121 cm]
Raise time to height: 12 s
Lowering time: 7 s
Rollback time: 3 s

Final Words

That’s all about the Ford 2600 Tractor Price, Specification, and Features. But If you have any problem regarding this post, then please comment in the below comment box. I will try to solve your problem as soon as possible. Thanks.