Farmall H Tractor Serial Numbers, Price, Review, Specs, Oil Capacity, History, Features & Pictures
Contents
The Farmall H tractor manufactured by the International Harvester company under the Farmall brand from 1939 to 1954 is a two-plow row crop tractor.
Raymond Loewy, Styled, was the most widely-produced of International Harvester’s “letter series,” with almost 390,000 manufactured over the 14-year run.
The Farmall H tractor is fitted with a 4-cylinder engine with a 152-cubic-inch (2,490cc) displacement and a 6-volt, positive ground electrical system with a generator.
The transmission includes six total gears: five forward and one reverse.
Farmall H was the smaller of the two leading row crop tractors manufactured by IH from the late 1930s to the early 1950s, along with the Farmall M tractor and its variants, yet could still use the same tools.
Now, let’s find out the Farmall H Tractor HP, Price, Specs, Review, Features & Images and more. I hope it will be useful to you.
Also Check Here :
- Massey ferguson 165 hydraulics diagram
- Cub cadet 2146 review
- Kubota l3250 specs
- John deere 4400 tractor review
- Kubota m5140 specs
Farmall H Tractor Price
Original Price: $2,000 USD (1953 )
Farmall H Tractor Serial Numbers
- 1939: 501
- 1940: 10653
- 1941: 52387
- 1942: 93237
- 1943: 122091
- 1944: 150251
- 1945: 186123
- 1946: 214820
- 1947: 241143
- 1948: 268991
- 1949: 300876
- 1950: 327975
- 1951: 351923
- 1952: 375861
- 1953: 390500
Farmall H Tractor Review Video
Farmall H Tractor Specifications
ENGINE
| Type | International Harvester C-152 gasoline 4-cylinder liquid-cooled 152.1 ci [2.5 L] |
| Bore/Stroke: | 3.375×4.25 inches [86 x 108 mm] |
| Compression: | 5.9:1 |
| Rated RPM: | 1650 |
| Firing order: | 1-3-4-2 |
| Starter: | hand-crank |
| electric* | |
| Starter volts: | 6 |
| Oil capacity: | 6 qts [5.7 L] |
| Coolant capacity: | 16.5 qts [15.6 L] |
| Sparkplug gap: | 0.025 inches [0.635 mm] |
| Point gap: | 0.013 inches [0.330 mm] |
| Intake valve clearance: | 0.017 inches [0.432 mm] * |
| Exhaust valve clearance: | 0.017 inches [0.432 mm] * |
ENGINE
| Type | International Harvester distillate 4-cylinder liquid-cooled vertical I-head 152.1 ci [2.5 L] |
| Bore/Stroke: | 3.375×4.25 inches [86 x 108 mm] |
| Compression: | 4.75:1 |
| Firing order: | 1-3-4-2 |
| Oil capacity: | 6 qts [5.7 L] |
| Coolant capacity: | 16.5 qts [15.6 L] |
ENGINE
| Type | International Harvester kerosene 4-cylinder liquid-cooled 152.1 ci [2.5 L] |
| Bore/Stroke: | 3.375×4.25 inches [86 x 108 mm] |
| Compression: | 4.5:1 |
| Firing order: | 1-3-4-2 |
| Oil capacity: | 6 qts [5.7 L] |
| Coolant capacity: | 16.5 qts [15.6 L] |
TRANSMISSION
| Type: | sliding gear |
| Gears: | 5 forward and 1 reverse |
| Clutch: | dry disc |
| Oil capacity: | 24 qts [22.7 L] |
FARMALL H POWER
| Drawbar (claimed): | 19 hp [14.2 kW] |
| Belt (claimed): | 24 hp [17.9 kW] |
| Drawbar (tested): | 24.17 hp [18.0 kW] |
| Belt (tested): | 26.20 hp [19.5 kW] |
DIMENSIONS
| Weight: | 3875 lbs [1757 kg] |
| Wheelbase: | 88.325 inches [224 cm] |
| Length: | 125.25 inches [318 cm] |
| Width: | 75.5 inches [191 cm] |
| 100 inches [254 cm] (long-axle) | |
| Height (steering wheel): | 74 inches [187 cm] |
| Front tread: | 8.1 inches [20 cm] |
| Rear tread: | 44 to 80 inches [111 to 203 cm] |
TYRES
| Ag front: | 5.50-16 |
| 6-16 | |
| Ag rear: | 51×6 (steel) |
| 6.00-36 | |
| 8-38 | |
| 9-38 | |
| 10-38 | |
| Ag front: | 6×20 (HV) |
Also Check:
Final Words
That’s all about the Farmall H Tractor Price, Specification, and Features. But If you have any problem regarding this post, then please comment in the below comment box. I will try to solve your problem as soon as possible. Thanks.