Farmall A Tractor Serial Numbers, Price, Reviews, Specs, Engine Oil Capacity, Attachments, History, Features & Pictures
Farmall (part of International Harvester) produced the Farmall A row-crop tractor between 1939 and 1947 in Chicago, Illinois, or Louisville Kentucky with2WD Equipped with either a 4- cylinder gasoline or kerosine engine and sliding gear transmission with four forward and one reverse gear.
The Farmall A and Farmall B were nearly identical tractors. The Farmall A equipped with an offset engine and wide front end.
The offset engine was known as “Cultivation”. The Farmall B tractor had a centered engine, seat offset to the right, and narrow front end.
Farmall A Tractor featured an International Harvester 1.9L 4-cyl gasoline and International Harvester 1.9L 4-cyl kerosene engine, 4 forward and 1 reverse gear, and 5 qts [4.7 L] Oil capacity.
Now, let’s find out the Farmall A Tractor HP, Price, Specs, Review, Features & Images, and more. I hope it will be useful to you.
Farmall A Tractor Price
Original Price: $750 USD (1947 )
Farmall a for sale
The price of a Farmall A for sale can vary depending on several factors such as its age, condition, location, and any additional features or attachments. here are some examples of Farmall A tractors for sale and their prices:
1948 Farmall Super A in Bridgeton, NJ – $2,400
Farmall A Tractor Review
The Case IH Farmall A series of tractors enjoys widespread popularity among farmers of all scales. Its reputation is built upon its dependable performance, adaptability, and cost-effectiveness.
With a range of options in terms of horsepower and features, the Farmall A series offers a model suited to meet any farming requirement.
For more details check out the YouTube video
The Farmall A Specs
HISTORY
| Manufacturer: | Farmall (a part of International Harvester) |
| Factory: | Chicago, Illinois, USA |
| Louisville, Kentucky, USA | |
| Total built: | 117,552 |
| Original price (USD) | |
| $750 (1947 ) | |
GASOLINE ENGINE
| ENGINE | International Harvester C113 gasoline 4-cylinder liquid-cooled 113.1 ci [1.9 L] |
| Bore/Stroke: | 3.00×4.00 inches [76 x 102 mm] |
| Compression: | 6.0:1 |
| Rated RPM: | 1400 |
| Firing order: | 1-3-4-2 |
| Starter: | manual |
| electric* | |
| Starter volts: | 6 |
| Oil capacity: | 5 qts [4.7 L] |
| Oil change: | 120 h |
| Coolant capacity: | 13 qts [12.3 L] |
KEROSENE ENGINE
| ENGINE | International Harvester kerosene 4-cylinder liquid-cooled 113.1 ci [1.9 L] |
| Bore/Stroke: | 3.00×4.00 inches [76 x 102 mm] |
| Rated RPM: | 1400 |
| Firing order: | 1-3-4-2 |
| Starter: | manual |
| electric* | |
| Starter volts: | 6 |
| Oil capacity: | 5 qts [4.7 L] |
| Coolant capacity: | 13 qts [12.3 L] |
TRANSMISSION
| Type: | sliding gear |
| Gears: | 4 forward and 1 reverse |
CAPACITY
| Fuel: | 10 gal [37.9 L] |
| Aux. fuel: | 1 gal [3.8 L] |
BELT PULLEY
| Diameter: | 8.50 inches [21 cm] |
| Width: | 6 inches [15 cm] |
| RPM: | 1156 |
| Speed: | 2574 ft/min [784.56 meters/min] |
PTO
| Rear PTO: | transmission |
| Rear RPM: | 540 (1.125) |
POWER
| Plows: | 1* |
| Drawbar (tested): | 16.32 hp [12.2 kW] |
| Belt (tested): | 18.34 hp [13.7 kW] |
MECHANICAL
| Chassis: | 4×2 2WD |
| Steering: | manual |
| Brakes: | mechanical contracting band |
| Cab: | Open operator station. |
DIMENSIONS
| Weight: | 2400 lbs [1088 kg] |
| Weight (ballasted): | 3,450 lbs [1564 kg] |
| Length: | 106.3 inches [270 cm] |
| Width: | 76.8 inches [195 cm] |
| Height (steering wheel): | 63.3 inches [160 cm] |
| Clearance (front axle): | 21.875 inches [55 cm] |
| Clearance (rear axle): | 20.875 inches [53 cm] |
TYRES
| Ag front: | 4.00-15 |
| Ag rear: | 9-24 |
Farmall A Tractor Serial Numbers
- 1939: FAA501
- 1940: FAA6744
- 1941: FAA41500
- 1942: FAA80739
- 1944: FAA96390
- 1945: FAA113218
- 1946: FAA146700
- 1947: FAA182964 (Chicago)
- Final: FAA198298 (Chicago)
- 1947: FAA200001 (Louisville)
- Final: FAA220829 (Louisville)
Official Kubota Tractor
Final Words
That’s all about the Farmall A Tractor Price, Specification, and Features. But If you have any problem regarding this post, then please comment in the below comment box. I will try to solve your problem as soon as possible. Thanks.
FAQs
Farmall A:
Has a mechanical lift system
No hydraulic block with lift arms under the gas tank
No Touch Control hydraulics
16.3 horsepower on the drawbar and 18.3 on the belt
21 inches of clearance
Farmall Super A:
Has a hydraulic block with lift arms under the gas tank
Has Touch Control hydraulics
13 horsepower on the drawbar and 16 horsepower on the PTO
28 inches of clearance
It is recommended to use SAE 30 non-detergent oil in the engine of a Farmall A.
The engine oil capacity of a Farmall A is 5 quarts.
No, a Farmall A does not have an oil filter.
You can find parts for your Farmall A at various tractor supply stores, online retailers, and through private sellers.
The value of a Farmall A can vary depending on its condition, age, and location. It is best to check with local dealerships or online marketplaces to get an idea of its value.
The recommended hydraulic fluid for a Farmall A is Hy-Tran or an equivalent hydraulic/transmission oil.
The maximum speed of a Farmall A is approximately 10 miles per hour.
The Farmall A does not come with an oil filter from the factory. However, there are aftermarket oil filters available that can be installed on the tractor. that type is Fleetguard LF618 with o-ring,
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.