Farmall 560 Serial Numbers, Price, Reviews, Specs, Horsepower, Engine Oil Capacity, Problems, Attachments
The Farmall 560, a two-wheel-drive row-crop tractor, was produced by Farmall, a division of International Harvester, from 1958 to 1963.
It came in two engine options: a 4.6 L (281.3 cu·in) six-cylinder diesel engine or a 263.0 cu·in (4.3 L) six-cylinder gasoline/LP-gas engine.
The tractor featured a sliding gear transmission with 5 forward and 1 reverse gear, or a partial power shift (Torque Amplifier) transmission with 10 forward and 2 reverse gears.
Farmall 560 tractors were available with the following engine choices:
-
D282 International Harvester: A 4.6 L, 281.3 cuin, six-cylinder naturally aspirated diesel engine. It had a compression ratio of 18.2:1, and its PTO output power was 59.5 HP (44.4 kW).
-
C263 International Harvester: This engine was a six-cylinder naturally aspirated gasoline or LP-gas engine with a displacement of 4.3 L, 263.0 cuin. The gasoline version had a compression ratio of 7.2:1, while the LP-gas version had a compression ratio of 8.7:1. The output power of this engine was also 59.5 HP (44.4 kW).
The Farmall 560 featured independent mechanical disc brakes, an open operator station, and optional manual rack-and-pinion or hydrostatic power steering.
It had a fuel tank capacity of 33 US gallons (124.9 liters) for gasoline and diesel fuel or 37 US gallons (140.0 liters) for LP gas.
If you are interested, let’s explore further details about the Farmall 560 Tractor, including its horsepower, price, specifications, reviews, features, and images. I hope this information proves useful to you.
Farmall 560 Tractor Price
Original Price: $5,500 (1963)
Tractor Serial Numbers
| Years | Serial Number |
| 1958 | 501 |
| 1959 | 7341 |
| 1960 | 26914 |
| 1961 | 36125 |
| 1962 | 47798 |
| 1963 | 60278 |
| final | 66032 |
Farmall 560 Tractor Review Video
Farmall 560 Specs
HISTORY
| Manufacturer: | Farmall (a part of International Harvester) |
| Total built: | 65,982 |
| Original price (USD): | $5,500 (1963) |
DIESEL ENGINE
| ENGINE | International Harvester D282 diesel 6-cylinder liquid-cooled vertical I-head 281.3 ci [4.6 L] |
| Bore/Stroke: | 3.6875×4.3906 inches [94 x 112 mm] |
| Air cleaner: | oil bath |
| Compression: | 18.2:1 |
| Rated RPM: | 1800 |
| Firing order: | 1-5-3-6-2-4 |
| Starter volts: | 12 |
| Oil capacity: | 9 qts [8.5 L] |
| Coolant capacity: | 16 qts [15.1 L] |
| Exhaust valve clearance: | 0.027 inches [0.686 mm] (hot) |
GASOLINE ENGINE
| ENGINE | International Harvester C263 gasoline 6-cylinder liquid-cooled vertical I-head 263 ci [4.3 L] |
| Bore/Stroke: | 3.5625×4.3906 inches [90 x 112 mm] |
| Air cleaner: | oil bath |
| Compression: | 7.2:1 |
| Rated RPM: | 1800 |
| Starter volts: | 12 |
LP GAS ENGINE
| Bore/Stroke: | 3.5625×4.3906 inches [90 x 112 mm] |
| Air cleaner: | oil bath |
| Compression: | 8.75:1 |
| Rated RPM: | 1800 |
| Starter volts: | 12 |
TRANSMISSION
| Type: | sliding gear |
| Gears: | 5 forward and 1 reverse |
| Oil capacity: | 64 qts [60.6 L] |
| Transmission: | Torque Amplifier |
| Type: | partial power shift |
| Gears: | 10 forward and 2 reverse |
| Oil capacity: | 64 qts [60.6 L] |
CAPACITY
| Fuel: | 33 gal [124.9 L] |
| 37 gal [140.0 L] (LP) | |
| Hydraulic system: | 16 gal [60.6 L] |
BELT PULLEY
| Diameter: | 11 inches [27 cm] |
| Width: | 7.5 inches [19 cm] |
HYDRAULICS
| Capacity: | 16 gal [60.6 L] |
| Valves: | 1 to 3 |
| Pump flow: | 12 gpm [45.4 lpm] |
| 17 gpm [64.3 lpm] (optional) | |
| Steering flow: | 2.5 gpm [9.5 lpm] |
PTO
| Rear PTO: | independent |
| Rear RPM: | 540 |
POWER
| Drawbar (claimed): | 54.8 hp [40.9 kW] |
| PTO (claimed): | 59.48 hp [44.4 kW] |
| Plows: | 5 |
| Drawbar (tested): | 53.12 hp [39.6 kW] |
| PTO (tested): | 63.03 hp [47.0 kW] |
| Belt (tested): | 60.11 hp [44.8 kW] |
MECHANICAL
| Chassis: | 4×2 2WD |
| Steering: | manual rack-and-pinion |
| hydrostatic power optional | |
| Brakes: | independent mechanical disc |
| Cab: | Open operator station. |
DIMENSIONS
| Weight (operating): | 6,563 lbs [2976 kg] (gas) |
| 6,785 lbs [3077 kg] (diesel) | |
| Weight (ballasted): | 9,460 lbs [4291 kg] |
| Wheelbase: | 96 inches [243 cm] |
| 100 inches [254 cm] (Hi-Clear) | |
| Length: | 141 inches [358 cm] |
| 155 inches [393 cm] (Hi-Clear) | |
| Width: | 85 inches [215 cm] (min) |
| 88 inches [223 cm] (Hi-Clear max) | |
| 107 inches [271 cm] (max) | |
| Height (steering wheel): | 88 inches [223 cm] |
| 107 inches [271 cm] (Hi-Clear) |
ELECTRICAL
| Ground: | negative |
| Charging system: | generator |
| Charging amps: | 20 |
BATTERY
| Number: | 1 (gas) |
| 2 (diesel) | |
| Volts: | 12 (gas) |
| 6 (diesel) |
TYRES
| Ag front: | 6.00-16 |
| 6.00-20 (Hi-Clear) | |
| Ag rear: | 12.4-38 |
| 13.6-38 |
Attachments
International Harvester 2001 Loader |
|
| Loader type: | International Harvester 2001 |
| Single-acting lift cylinders. | |
| Weight: | 1160 lbs [526 kg] |
| Height (to pin): | 148.5 inches [377 cm] |
| Clearance, dumped bucket: | 98 inches [248 cm] |
| Breakout force (lift): | 4000 lbs [1814 kg] |
| Lift to full height (at pin): | 2000 lbs [907 kg] |
| Bucket width: | 40 inches [101 cm] |
International Harvester 2001 Loader |
|
| Loader type: | International Harvester 2001 |
| Double-acting lift cylinders. | |
| Weight: | 1160 lbs [526 kg] |
| Height (to pin): | 148.5 inches [377 cm] |
| Clearance, dumped bucket: | 98 inches [248 cm] |
| Breakout force (lift): | 2600 lbs [1179 kg] |
| Lift to full height (at pin): | 1350 lbs [612 kg] |
| Bucket width: | 40 inches [101 cm] |
International Harvester 2000 Loader |
|
| Loader type: | International Harvester 2000 |
| Weight: | 1417 lbs [642 kg] |
| Height (to pin): | 125 inches [317 cm] |
| Clearance, dumped bucket: | 105 inches [266 cm] |
| Rollback angle: | 18 |
| Breakout force (lift): | 4000 lbs [1814 kg] |
| Lift to full height (at pin): | 2000 lbs [907 kg] |
| Bucket width: | 48 inches [121 cm] |
| 60 inches [152 cm] | |
Farmall 560 Tractor Problems
Based on the search results, Farmall 560 tractor owners have encountered several common problems, including:
-
Rear-end problems: Early models of the Farmall 560 experienced rear-end issues due to the stress of row crop farming.
-
Milky engine oil: Some Farmall 560 owners reported issues with milky engine oil, likely caused by gas getting into the oil.
-
Hydraulic issues: One Farmall 560 owner reported facing hydraulic problems, affecting the proper functioning of the tractor’s hydraulic system.
-
Fuel issues: Another Farmall 560 owner mentioned experiencing fuel-related problems, which could be affecting the tractor’s fuel delivery system.
-
Decreased engine power: A prevalent issue among Farmall 560 owners is a decrease in engine power, leading to sluggish performance, difficulty starting, or a lack of power during operation.
If you are facing any of these problems with your Farmall 560 tractor, it is highly recommended to seek assistance from a qualified mechanic or tractor repair specialist.
Proper diagnosis and timely repairs can help restore the tractor’s performance and ensure its continued efficiency on the farm.
Final Words
That’s all about the Farmall 560 Tractor’s Price, Specification, and Features. But If you have any problem regarding this post, then please comment in the below comment box. I will try to solve your problem as soon as possible. Thanks.
FAQs
The serial numbers for the Farmall 560 tractor can be found on the left side of the transmission case, near the clutch housing.
The Farmall 560 tractor experienced problems due to the final drive not being strong enough to handle the engine’s power. The extra power from the new motor accelerated bearing wear in the bull gear assembly.
Features of the Farmall 560 tractor may vary depending on the year and model. Some common features include a six-cylinder engine, a three-point hitch, and a live PTO.
The hydraulic system of the Farmall 560 tractor may vary depending on the year and model. Some common features include Tel-A-Depth linkages to control implement depth, several choices of hydraulic pumps, and one, two, or three connection valves.
the Farmall 560 tractor’s horsepower may vary depending on the year and model. Some common horsepower ratings include 60, 66, and 70.
the Farmall 560 tractor was replaced by the Farmall 1206 in the 1960s.
The electrical system of the Farmall 560 tractor may vary depending on the year and model. Some common features include a 12-volt battery and a generator or alternator.
The Farmall 560 tractor was introduced in 1958 as a replacement for the Farmall 450. It was produced until 1963 and was popular among farmers for its power and versatility.
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.