Contents
Branson 2515h Specs, Price
Branson tractors is one of the largest companies and offering a different type of Branson 2515h tractors model with individual specification and price. So if you are finding the Branson 2515h Tractor price information then check here in this post the Branson 2515h Tractor price, specification, model image and more related it.
Also Check Here :
- John Deere 850 specs
- Branson tractors review
- Husqvarna yth21k46 review
- John deere 955 tractor specs
- John deere lt160 specs
Branson 2515h Tractor Price
Price: $16,950
Branson 2515h Tractor Features
- Clean EPA Tier 4 Engine
- 12F/12R or 3Range
- Hydrostatic Steering, Fingertip ease
- Skid Steer bucket loader
- Unbeatable lift capacity 2,200 lbs
- Weight 3,014 lbs
Branson 2515h Tractor Specification
| General | |
| Drive System | 4 Wheel Drive |
| Steering | Hydrostatic |
| Clutch | |
| Battery | 12V |
| Brake | Wet Multi Disc |
| Engine | |
| Model | A1700N6-UTR 3 |
| Type | Vertical 4 Cycle, Water Cooled, Diesel |
| Combustion System | |
| Aspiration | Naturally |
| Horsepower | 18 kW |
| RPMs | 2600 |
| No. of Cylinders | 3 |
| Bore x Stroke | 88 x 94mm |
| Displacement | 1714 cc |
| Compression Ratio | |
| Air Cleaner Type | |
| Fuel | Diesel fuel |
| Max. Torque | 9.5±0.5/1,600 |
| Revolution | 2,100 rpm |
| Capacity | |
| Fuel Tank | 7.13 gal |
| Engine Crankcase | 1.14 gal |
| Coolant | 1.32 gal |
| Transmission case | Manual: 34 (8.98) I HST: 37 (9.77) |
| Engine HP @ RPM | 24 @ 2600 |
| Tires | |
| Front Tread | 7×16 |
| Rear Tread | 11.2 x 24 |
| AG | .7 x 16-6, 11.2 x 24-8 |
| Ind | 25 x 8.50 x 14-6, 15 x 19.5 |
| Turf | 27 x 8.50 x 15-4, 41 x 14.00 x 20-4 |
| Dimensions | |
| Overall Length | 121.88 in |
| Overall Width | 57.13 in |
| Height with ROPS | 104.06 in |
| Wheelbase | 65.79 in |
| Ground Clearance | 13.19 in |
| Weight | 3,014 lbs |
| Front Tread | 47.28 |
| Rear Tread | 45.87 |
| Transmission | |
| Type | HST |
| Gear Shifting (F&R) | 12F/12R 3 Range |
| Travel Speed (F&R) | |
| Main Shift | HST |
| Reverse Method | HST |
| Gear Shifting | HST / 3 Range |
| PTO | |
| Type | Independent |
| Speed | 560 RPM |
| Power | 19 hp |
| PTO shaft specification | 0 35 mm – 6 splines |
| Revolution | 1st 53312nd: NIA |
| Hydraulic System | |
| Type | Position Control |
| 3-Point Hitch | Category 1 Position |
| Lift Capacity | 1,600 kg |
| Position Lift Capacity @ 24” | 2,646 lbs. |
| Steering Pump Flow | |
| Total Flow GPM | 13.8 |
| Steering flow WPM | 4.8 |
| Implement flow GPM | 9 |
| Main Pump Flow | |
| Control System | Position Control type |
| Pump Flow Capacity | 35.2 LPM |
| 3-point hitch | CAT. 1 |
| Max. Lift | 1,600 kg |
| Driving System | |
| Tire Front Wheel | 8.0-16 6PR |
| Tire Rear Wheel | 12.4-24 6PR |
| Steering system | Fully hydraulic |
| Brake Driving | Wet Multi Disc |
| Brake Parking | Foot Brake Lever Type |
Also Find Here :
- John deere 4430 review
- John deere 3025e tractor specs
- Kabota l4200 specs
- Cub cadet gt1554 specs
- Long 610 specs
Final Words
Above all the information is related to the Branson 2515h Tractor Specification, Hope you have got the details as per your requirements from here, but if you have any query then you can post a comment in the below comment box and if you like then please share on social media with your friends.
Leave a Reply