Branson 2505h Specs, Price
Guys !! Let’s look at the Branson 2505h Tractor’s Specification, Attachments, Performance, and other details about the tractor. So kindly read this article and gather the information you need.
Branson 2505h Tractor Price
Price: $20,995
Branson 2505h Tractor Description
- 2 Range HST Transmission
- Hydrostatic Steering and Cruise Control
- One-Touch ON/OFF switch
- Quick Disconnect Loader
- 60-inch Mid Mount Finish Mower
Branson 2505h Tractor Specification
| General | |
| Drive System | |
| Steering | Hydrostatic |
| Clutch | N/A |
| Battery | 12V |
| Brake | Wet Disc |
| Engine | |
| Model | 3TNV80E |
| Type | Yanmar Water Cooled |
| Combustion System | Swirl Chamber |
| Aspiration | Natural |
| HP | 24.2 |
| RPMs | 3000 |
| No. of Cylinders | 3 |
| Bore x Stroke | 3.15 in x 3.31 in |
| Displacement | 1267 cc |
| Compression Ratio | 23.1: 1 |
| Air Cleaner Type | Single Dry |
| Fuel Capacity | 5.8 gal |
| Tires | |
| Front Tread | 18×8.5-10-4 |
| Rear Tread | 26×12-12-4 |
| Dimensions | |
| Overall Length | 104 in |
| Overall Width | 45.88 in |
| Height with ROPS | 91.3 in |
| Wheelbase | 57.5 in |
| Ground Clearance | 9.4 in |
| Weight | 1610 lbs |
| Transmission | |
| Type | HST (2 Speed) |
| Gear Shifting (F&R) | |
| Travel Speed (F&R) | 7.8 mph |
| PTO | |
| Type | Independent PTO |
| Speed | Rear 540 / Mid 2000 |
| Power | 18.8 hp |
| Hydraulic System | |
| Type | Single Gear Pump with Flow Divider |
| 3-Point Hitch | Category 1 |
| Lift Capacity | 1323 lbs |
| Steering Pump Flow | 2.77 GPM |
| Main Pump Flow | 4.1 GPM |
Also Find Here :
- Allis chalmers 180 specs
- John deere 318 specs
- Cub cadet 100 specs
- Case 444 review
- Massey-ferguson-97 specs
Final Words
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.
Give me the weight of tractor,mower,and loaded with cab
How tall is branson 2505h with a cab on it?
On the 2505h with a mid mount mower can you raise and lower the 3 pt. arms without raising and lowering the mower deck