Allis Chalmers D19 Specs,Weight, Price & Review
Take a look at this From the (official site), I have compiled all you need to know about the Allis Chalmers D19, including its dimensions, pricing, and features, in this page.
Allis Chalmers D19 Overview
It had a six-cylinder, naturally aspirated, 4.3 L, 4,293 cm2 (262.0 cu in) engine with a bore and stroke of 90.0 mm (3.54 in) and 111.0 mm (4.37 in), respectively. Rating for compression ratio: 8.0:1. At 2,000 revolutions per minute, its engine generated 75.2 PS (55.3 kW; 74.2 HP), or 74.2 HP.
Engone Allis Chalmers diesel It has a six-cylinder, 4.3 L, 4,293 cm2 (262.0 cu in), turbocharged diesel engine. The piston stroke is 111.0 mm and the cylinder bore is 90.0 mm (3.54 in) (4.37 in). At 2,000 rpm, its engine delivered 72.5 PS (53.3 kW; 71.5 HP) of output power.
Allis Chalmers D19 Price
Price: $5,300
Allis Chalmers D19 Horsepower
Horsepower:70 hp
Allis Chalmers D19 Weight
Operating Weight: 6650 to 6840 pounds
Allis Chalmers D19 Specification
Allis Chalmers D19 Serial Numbers
| Location: | Top side of rear axle, below the seat |
| 1961 | 1001 |
| 1962 | 1250 |
| 1963 | 12001 |
| 1964 | 14945 |
Allis Chalmers D19 Production
| Manufacturer | Allis Chalmers |
| Total built | 10,591 |
| Built in West Allis | Wisconsin, USA |
| Original price | $5,300 |
Allis Chalmers D19 Power
| Engine | 85 hp 63.4 kW |
| Diesel Drawbar (claimed) | 62.5 hp 46.6 kW |
| Gas Drawbar (claimed) | 66.5 hp 49.6 kW |
| LP-gas Drawbar (claimed) | 61.5 hp 45.9 kW |
| Diesel PTO (claimed) | 70.4 hp 52.5 kW |
| Gas PTO (claimed) | 75.3 hp 56.2 kW |
| LP-gas PTO (claimed) | 69.6 hp 51.9 kW |
| Plows | 5 |
| Drawbar (tested) | 63.91 hp 47.7 kW |
| PTO (tested) | 71.54 hp 53.3 kW |
Allis Chalmers D19 Engine Detail
| Displacement | 262 ci 4.3 L |
| Bore/Stroke | 3.5625×4.375 inches 90 x 111 mm |
| Power | 85 hp 63.4 kW |
| Air cleaner | dry with precleaner |
| Compression | 8.0:1 |
| Rated RPM | 2000 |
| Starter volts | 12 |
Allis Chalmers D19 Transmission
| Transmission | Power Director |
| Type | sliding gear |
| Gears | 8 forward and 2 reverse |
Allis Chalmers D19 Tractor hitch
| Rear Type | II |
| Type | Snap-Coupler |
Allis Chalmers D19 Tires
| Ag front | 6.50×16 |
| Ag rear | 15.5×38 |
| Ag front | 9.00×10 (single front) |
| Ag rear | 16.9×34 |
Allis Chalmers D19 Dimensions
| Wheelbase | 102.4 inches 260 cm |
| Length | 154 inches 391 cm |
| Width | 83.6 inches 212 cm |
| Height | 89 inches 226 cm |
| Rear axle | 2.75 inch diameter 69 mm |
| Front tread | 60 to 84 inches 152 to 213 cm |
| Rear tread | 60 to 80 inches 152 to 203 cm |
| Rear tread | 60 to 88 inches 152 to 223 cm (PAVT) |
Allis Chalmers D19 Weight
| Operating | 6,650 lbs (gas) 3016 kg |
| Ballasted | 11,210 lbs 5084 kg |
Allis Chalmers D19 Video
Allis Chalmers D19 FAQs
How many Allis Chalmers D19?
In 1956, power steering was made available as an optional extra. Between the years 1953 and 1957, a total of 90,352 Allis Chalmers C were produced. Of those, 6,509 were diesels.
What is the most popular Allis-Chalmers tractor?
After making improvements to the Model W to make it more suitable for cultivating, Allis-Chalmers went on to design the WC. It was in 1932 that Allis-Chalmers was the company that first introduced the use of rubber tyres in agricultural settings. Building on that success, the Model WC went on to become the Allis-Chalmers tractor that sold the most units overall.
What year did Chalmers go out of business?
In the 1980s, the corporation was confronted with severe financial challenges and was had to dispose of a significant portion of its operational businesses. In 1999, Allis-Chalmers announced that it would no longer be in business. This came just under 140 years after E.P. Allis made his initial push into the industrial boom of Milwaukee.
Allis Chalmers D19 Final Word
I sincerely hope that you were able to find all of the information you were looking for online. Additionally, I sincerely hope you enjoyed reading the post. If you have any questions or issues that you’d like addressed, feel free to write a note in the comment section.
I’ll get back to you as soon as I can, I swear. I want to thank you for your time and express my hope that you will continue to read my blog in order to see more posts like this one in the future.
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.