Hey, Farmers! Are you confused about the Allis Chalmers D10, and do you know about the Allis Chalmers D10 price, Specs, Oil Capacity, Weight and review?
So don’t worry my friends here in this article we are providing all kinds of information about the Allis Chalmers price, Specs, Problems, key features, and its implements.
All kinds of information are genuine and reliable; you can trust it. No one can cheat on you after reading this post.
Allis Chalmers D10 Price New and Used
Country | New Price Range (USD) | Used Price Range (USD) |
---|---|---|
USA | $8,000 – $12,000 | $4,000 – $7,000 |
Europe | €7,000 – €10,000 | €3,500 – €6,000 |
Australia | 12,000 AUD – 18,000 AUD | 6,000 AUD – 10,000 AUD |
Allis Chalmers D10 Horsepower
The Allis Chalmers D10 tractor has a gross horsepower of 31 horsepower (23 kW).
Allis Chalmers D10 Weight
The Allis Chalmers D10 tractor has a shipping weight of 2800 pounds and a ballasted weight of 4800 pounds
Allis Chalmers D10 Top Speed
The top speed of an Allis Chalmers D10 tractor is 12.1 MPH in direct drive.
Allis Chalmers D10 Fuel Capacity
The Allis-Chalmers D10 tractor has a fuel capacity of 12 gallons (45.4 litres).
Allis Chalmers D10 Oil Capacity
The Allis Chalmers D10 has an oil capacity of 4 quarts.
Allis Chalmers D10 Serial Numbers | |
Year | Serial Numbers |
1959 | 1001 |
1960 | 1950 |
1961 | 2801 |
1962 | 4511 |
1963 | 6801 |
1964 | 7675 |
1965 | 9204 |
1966 | 9486 |
1967 | 9795 |
Allis Chalmers D10 Specs
Manufacturer | Allis Chalmers |
Row-Crop tractor | |
Built-in West Allis, Wisconsin, USA |
Allis Chalmers D10 Engine
Engines overview | |
Allis-Chalmers 2.3L 4-cyl gasoline | |
Allis-Chalmers 2.4L 4-cyl gasoline |
Engine Detail | Allis-Chalmers Power-Crater gasoline 4-cylinder liquid-cooled vertical L-head |
Displacement | 138.7 ci 2.3 L |
Bore/Stroke | 3.375×3.875 inches 86 x 98 mm |
Power | 31 hp 23.1 kW |
Air cleaner | oil bath |
Compression | 7.75:1 |
Rated RPM | 1650 |
Starter volts | 6 |
Oil Capacity | 4 qts 3.8 L |
Coolant capacity | 8 qts 7.6 L |
Engine Detail | Allis-Chalmers gasoline 4-cylinder liquid-cooled |
Displacement | 149 ci 2.4 L |
Bore/Stroke | 3.50×3.875 inches 89 x 98 mm |
Air cleaner | oil bath |
Compression | 7.5:1 |
Rated RPM | 1650 |
Firing order | 1-2-4-3 |
Starter volts | 12 |
Allis Chalmers D10 Transmission
Type | sliding gear |
Gears | 4 forward and 1 reverse |
Allis Chalmers D10 Dimensions
Wheelbase | 78.75 inches 200 cm |
Length | 120.5 inches 306 cm |
Height (hood) | 52 inches 132 cm |
Height (exhaust) | 76 inches 193 cm |
Shipping weight | 2,700 lbs 1224 kg |
Ballasted weight | 4,800 lbs 2177 kg |
Clearance (front axle) | 21 inches 53 cm |
Clearance (rear axle) | 22.25 inches 56 cm |
Front tread | 40 to 64.7 inches 101 to 164 cm |
Rear tread | 42 to 72 inches 106 to 182 cm |
Allis Chalmers D10 Tires | |
Ag front | 4.00×15 |
Ag rear | 9×24 |
Ag front | 5.00×15 |
Ag rear | 10×24 |
Allis Chalmers D10 Power | |
Engine | 31 hp 23.1 kW |
Drawbar (claimed) | 26 hp 19.4 kW |
PTO (claimed) | 30.1 hp 22.4 kW |
Drawbar (tested) | 28.78 hp 21.5 kW |
PTO (tested) | 33.46 hp 25.0 kW |
Hydraulics | |
Type | live |
Valves | 1 or 2 |
Mechanical | |
Two-wheel drive | |
Steering | manual |
Differential mechanical shoe brakes | |
Open operator station |
Tractor hitch | |
Rear Type | I |
Type | Snap-Couple |
Power Take-off (PTO) | |
Rear PTO | transmission, independent (later) (original) |
Rear RPM | 540 |
Also, Check
- Allis Chalmers 8070
- Allis Chalmers 7060
- Allis Chalmers 175
- Allis Chalmers D19
- Allis Chalmers 7080
- Allis Chalmers 220
Allis Chalmers D10 Review
The Allis Chalmers D10 is a compact utility tractor manufactured between 1960 and 1965. It is driven by a 10-horsepower, two-cylinder engine and features a four-speed transmission.
Weighing only 1,500 pounds, the D10 is a lightweight tractor, perfectly suited for small-scale tasks and confined spaces.
For more details check out this YouTube Video
Final Words
That was all about the Allis Chalmers D10 Price, Specs, Review, and Key Features, but if you have any queries regarding this post, then please comment below in the comment box, We will solve your problem as soon as possible, thanks for visiting our site and stay tuned to our site for more new stuff like this.
My name is Ranjitsinh Mantri founder of this blog and I am a full-time blogger writing is my passion. Just before 4 years ago We started this website in 2019 with my team to share our knowledge about tractor models and its prices guide on the internet.