Allis Chalmers 7060 Specs,Weight, Price & Review
Take a look at this From the (official site), I have compiled all you need to know about the Allis Chalmers 7060, including its dimensions, pricing, and features, in this page.
Allis Chalmers 7060 Overview
The Allis Chalmers model 7060 received the new Accousta Cab II with console shift, new seating, and new lighting in 1978, serial number 6001. The tractor’s orange chassis was replaced by a black one. A gear shift, range shift, and the two-speed Power Director are all used by the Power Director.
One of the five forward gears or reverse can be chosen using the gear shift lever. Between high and low ranges are selected using the range shift lever. To change the gear or range, the tractor must be halted and the clutch pedal applied.
Once the Power Director is moving, it is controlled by two foot switches that can be changed while moving and without using the clutch.
Allis Chalmers 7060 Price
Price: $48,696
Allis Chalmers 7060 Horsepower
Horsepower: 192 hp 143.2 kW
Allis Chalmers 7060 Weight
Operating Weight: 11530 to 14645 pounds
Allis Chalmers 7060 Specification
Allis Chalmers 7060 Serial Numbers
Location: | Above PTO shield |
1974: | 1001 |
1975: | 1299 |
1976: | 2749 |
1977: | 4582 |
1978: | 6001 |
1979: | 6789 |
1980: | 7693 |
1981: | 8442 |
Final: | 9142 |
Allis Chalmers 7060 Production
Manufacturer: | Allis Chalmers |
Type: | Row-Crop tractor |
Factory: | West Allis, Wisconsin, USA |
Total built: | 7,796 |
Original price: | $48,696 |
Allis Chalmers 7060 Power
Power at rated engine speed: | 161.51 hp 120.4 kW |
Fuel use: | 10.2 gal/hour 38.6 l/hour |
Power at rated PTO speed: | 160.44 hp 119.6 kW |
Fuel use: | 10.0 gal/hour 37.9 l/hour |
Max power: | 136.12 hp 101.5 kW |
Fuel use: | 10.0 gal/hour 37.9 l/hour |
Max pull: | 17,370 lbs 7879 kg |
Allis Chalmers 7060 Engine Detail
Displacement: | 426 ci 7.0 L |
Bore/Stroke: | 4.25×5.00 inches 108 x 127 mm |
Power: | 192 hp 143.2 kW |
Air cleaner: | dry with pre-cleaner |
Compression: | 16:1 |
Rated RPM: | 2300 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 12 |
Coolant capacity: | 32 qts 30.3 L |
Intake valve clearance: | 0.015 inches 0.381 mm (hot) |
Exhaust valve clearance: | 0.015 inches 0.381 mm (hot) |
Allis Chalmers 7060 Mechanical
Chassis: | 4×2 2WD |
Final drives: | inboard planetary |
Steering: | hydrostatic power |
Brakes: | differential power wet disc |
Cab: | Accousta cab standard, A/C optional. Accousta cab II available in 1978. |
Transmissions: | 20-speed partial power shift |
Allis Chalmers 7060 Transmission
Transmission: | Allis-Chalmers Power Director |
Type: | partial power shift |
Gears: | 20 forward and 4 reverse |
Oil capacity: | 29.6 qts 28.0 L |
Oil type: | Allis-Chalmers Power Fluid 821 |
Allis Chalmers 7060 Hydraulics
Type: | closed center |
Valves: | 2 or 3 |
Pump flow: | 22 gpm 83.3 lpm |
Total flow: | 45 gpm 170.3 lpm |
Steering flow: | 9.5 gpm 36.0 lpm |
Allis Chalmers 7060 Serial Numbers
Rear Type: | 3/2 |
Rear lift (at 24″/610mm): | 6,680 lbs 3030 kg |
Allis Chalmers 7060 Power Take-off (PTO)
Rear PTO: | independent |
Rear RPM: | 1000 |
Allis Chalmers 7060 Electrical
Ground: | negative |
Batteries: | 2 |
4 (optional) | |
Battery volts: | 12 |
Allis Chalmers 7060 Dimensions
Wheelbase: | 106 inches 269 cm |
Length: | 163 inches 414 cm |
Width: | 95.5 inches 242 cm |
119.5 inches 303 cm (optional long axle) |
|
Ground clearance: | 22 inches 55 cm (front axle) |
28 inches 71 cm (rear axle) |
|
Rear axle: | 3.75 inch diameter 95 mm |
Rear axle: | 4.00 inch diameter 101 mm |
Allis Chalmers 7060 Weight
Shipping: | 11,530 lbs 5230 kg |
Operating: | 13,990 lbs 6345 kg (Power Director) |
14,645 lbs 6642 kg (Power shift) |
|
Ballasted: | 20,560 lbs 9326 kg |
Allis Chalmers 7060 Height
Steering wheel: | 87 inches 220 cm |
Hood: | 69 inches 175 cm |
Exhaust: | 117 inches 297 cm |
Allis Chalmers 7060 review
The Allis Chalmers 7060, a four-wheel-drive tractor in production from 1975 to 1985, runs on a 426-cubic-inch 6-cylinder diesel engine, churning out 170 horsepower.
It was offered with the choice of either a powershift or manual transmission and boasted an impressive 3-point hitch capacity of 14,000 pounds.
The 7060 enjoyed popularity during its heyday and continues to be in extensive use today. Its strong suits lie in its reliability, durability, and substantial power.
Maintenance and repair are also relatively straightforward, adding to its appeal. For a full review, please check this YouTube video Here.
Allis Chalmers 7060 FAQs
How many Allis Chalmers 7060 ?
In 1956, power steering was made available as an optional extra. Between the years 1953 and 1957, a total of 90,352 Allis Chalmers C were produced. Of those, 6,509 were diesels.
What is the most popular Allis-Chalmers tractor?
After making improvements to the Model W to make it more suitable for cultivating, Allis-Chalmers went on to design the WC. It was in 1932 that Allis-Chalmers was the company that first introduced the use of rubber tyres in agricultural settings. Building on that success, the Model WC went on to become the Allis-Chalmers tractor that sold the most units overall.
What year did Chalmers go out of business?
In the 1980s, the corporation was confronted with severe financial challenges and was had to dispose of a significant portion of its operational businesses. In 1999, Allis-Chalmers announced that it would no longer be in business. This came just under 140 years after E.P. Allis made his initial push into the industrial boom of Milwaukee.
Allis Chalmers 7060 Final Word
I sincerely hope that you were able to find all of the information you were looking for online. Additionally, I sincerely hope you enjoyed reading the post. If you have any questions or issues that you’d like addressed, feel free to write a note in the comment section.
I’ll get back to you as soon as I can, I swear. I want to thank you for your time and express my hope that you will continue to read my blog in order to see more posts like this one in the future.