4030 John Deere Specs, Loader Attachments Information {2024}

4030 John Deere Specs, Loader Attachments Information {2024}

The John Deere 4030 is a row-crop tractor that was produced from 1973 to 1977. It is powered by a 5.4L 6-cylinder diesel engine that produces 80.33 horsepower at the drawbar and 80 horsepower at the PTO.

The tractor has a closed central hydraulic system with a capacity of 13 gallons and a flow rate of 23 gallons per minute. It can be equipped with a front-end loader, such as the John Deere 148 loader, which has a weight of 1350 lbs and a lift capacity of 3100 lbs at the pin.

Here are the key specifications, price, and details about the 4030 John Deere Specs:

John Deere 4030 Specs

4030 John Deere

Production

Manufacturer:John Deere
Type:Row-Crop tractor
Factory:Waterloo, Iowa, USA
Total built:15,690 (total)
222 (gasoline)
Original price:$17,721 (1977 )

John Deere 4030 Diesel Engine Detail

6-cylinder
liquid-cooled inline horizontal-shaft
Displacement:329 ci
5.4 L
Bore/Stroke:4.02×4.33 inches
102 x 110 mm
Air cleaner:dry with secondary element
Pre-heating:ether injection
coolant heater*
Compression:16.2:1
Rated RPM:2500
Idle RPM:800-2660
Operating RPM:1500-2500
Starter:electric
Starter volts:12
Oil capacity:17 qts
16.1 L
Coolant capacity:22 qts
20.8 L

John Deere 4030 Gasoline Engine Detail

6-cylinder
liquid-cooled
The gasoline engine was available only during the 1973 model year on the 4030.
Displacement:303 ci
5.0 L
Bore/Stroke:3.86×4.33 inches
98 x 110 mm
Starter:electric
Starter volts:12

John Deere 4030 Power

Power at rated engine speed:80.33 hp
59.9 kW
Fuel use:5.6 gal/hour
21.2 l/hour
Power at rated PTO speed:77.72 hp
58.0 kW
Fuel use:5.0 gal/hour
18.9 l/hour

John Deere 4030 Capacity

Fuel:35 gal
132.5 L
Hydraulic system:13 gal
49.2 L

John Deere 4030 Syncro-Range Transmission

Type:partially synchronized
Gears:8 forward and 2 reverse
Clutch:hydraulic wet disc
Oil capacity:64 qts
60.6 L

John Deere 4030 Quad-Range Transmission

Type:partial power shift
Gears:16 forward and 6 reverse
Clutch:hydraulic wet disc
Oil capacity:64 qts
60.6 L

Syncro-Range Creeper Transmission

Type:creeper
Gears:13 forward and 4 reverse

John Deere 4030 Dimensions

Wheelbase:101 inches
256 cm
Length:154.4 inches
392 cm
Height (steering wheel):84.5 inches
214 cm
Height (cab):107.7 inches
273 cm
Clearance (front axle):21.95 inches
55 cm
Clearance (rear axle):27.24 inches
69 cm
Clearance (drawbar):14.1 inches
35 cm
Rear axle:Rack-and-pinion: 2.875 by 86 inches
73 by 2184 mm
Rear axle:Rack-and-pinion: 3.125 by 112 inches
79 by 2844 mm
Rear axle:Rack-and-pinion: 3.125 by 112 inches
79 by 2844 mm
Front tread:48 to 68 inches
121 to 172 cm
Rear tread:60 to 92 inches
152 to 233 cm
Rear tread:60 to 101 inches
152 to 256 cm
Rear tread:61 to 117 inches
154 to 297 cm

John Deere 4030 Hydraulics

Type:closed center
Capacity:13 gal
49.2 L
Valves:1 to 3
Pump flow:23 gpm
87.1 lpm

John Deere 4030 Power Take-off (PTO)

Rear PTO:independent
Rear RPM:540/1000 (1.375)

John Deere 4030 Dimensions & Tires

Wheelbase:101 inches
256 cm
John Deere 4030 Weight:7340 to 9180 pounds
Front tire:6.00-16
Rear tire:15.5-38

John Deere 4030 Electrical

Ground:negative
Charging system:alternator
Batteries:2
Battery volts:6

John Deere 4030 Serial Numbers

Location:Serial number plate on the rear of the John Deere 4030, above the PTO shaft.
1973:1000
1974:6700
1975:10153
1976:13022
1977:15417
Final:16689

Also Check,

John Deere 148 Loader Attachments

John Deere 148 Loader

Loader weight:1350 lbs
612 kg
Height (to pin):126 inches
320 cm
Clearance, dumped bucket:102 inches
259 cm
Dump reach:32 inches
81 cm
Dump angle:38°
Clearance, level bucket:121 inches
307 cm
Rollback angle:11°
Breakout force (lift):4700 lbs
2131 kg
Lift to full height (at pin):3100 lbs
1406 kg
Bucket capacity:0.5 cu yd
0.4 cu m
0.6 cu yd
0.5 cu m
0.8 cu yd
0.6 cu m
0.9 cu yd
0.7 cu m
Bucket width:60 inches
152 cm
72 inches
182 cm
84 inches
213 cm
96 inches
243 cm